Sökning: "PHASE-TRANSFORMATION"

Visar resultat 1 - 5 av 105 avhandlingar innehållade ordet PHASE-TRANSFORMATION.

1. 1. Phase transformation and stability studies of the Zr-H system

   Författare :Tuerdi Maimaitiyili; Lars Hallstadius; Malmö högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Zirconium hydride; synchrotron X-ray diffraction; Nuclear materials; phase transformation; in-situ hydrogen charging; hydrogen related degradation; neutron diffraction; powder diffraction; Rietveld analysis; γ-ZrH; hydrogen embrittlement; zirconium hydride; γ-ZrH; synchrotron X-ray diffraction; neutron diffraction; hydrogen charging; in situ phase transformation; hydrogen embrittlement; hydrogen induced degradation;

   Sammanfattning : Zirconium alloys are widely used in the nuclear industry because of their high strength, good corrosion resistance and low neutron absorption cross-section. Zirconium has a strong affinity for hydrogen, however, and if hydrogen concentration builds up, the material will gradually degrade. LÄS MER

3. 2. In-situ phase studies of the Zr-H system

   Författare :Tuerdi Maimaitiyili; Malmö högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Zirconium hydride; synchrotron X-ray diffraction; neutron diffraction; phase transformation; in-situ hydrogen charging; hydrogen related degradation; in situ phase transformation; hydrogen embrittlement; hydrogen charging; zirconium hydride; γ-ZrH; synchrotron X-ray diffraction; neutron diffraction; hydrogen induced degradation;

   Sammanfattning : Zirconium alloys are widely used in the nuclear industry because of their high strength, good corrosion resistance and low neutron absorption cross-section. However, zirconium has strong affinity for hydrogen, which may lead to hydrogen concentration build-up over time during a corrosion reaction when exposed to water. LÄS MER

4. 3. Microstructure and phase transformation of Ti-6Al-4V

   Författare :Robert Pederson; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

   Sammanfattning : The research described in the thesis concerns phase transformations and fatigue properties in the Ti-6Al-4V alloy. The need to weld the alloy for certain engine components can expose the alloy locally to non-optimum thermal cycles and it is therefore of importance to gain an understanding of the kinetics involved in the phase transformations during heating and cooling. LÄS MER

5. 4. Deformation and martensitic phase transformation in stainless steels

   Författare :Peter Hedström; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Engineering Materials; Materialteknik;

   Sammanfattning : The use of high-energy synchrotron x-rays which has enabled three- dimensional structural characterization from the nano- to the macroscopic scale, and now to the meso-scale, such as individual grains and dislocation structures, is a major scientific advance. This is the first technique with sufficient spatial resolution and penetration power to probe the local structure embedded deep within the material. LÄS MER

7. 5. Applications of pulsed lasers for phase transformation and welding

   Författare :Istvan Sarady; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Manufacturing Systems Engineering; Produktionsutveckling;

   Sammanfattning : This work deals with the interaction of pulsed laser radiation with solid, metallic materials at moderate and very high power densities. The interaction mechanism depends upon the properties of both the laser and the target material. LÄS MER