Sökning: "Ovako"

Hittade 4 avhandlingar innehållade ordet Ovako.

  1. 1. Formation of Inclusions and their Development during Secondary Steelmaking

    Författare :Mikael Thunman; Du Sichen; Piotr Scheller; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Metallurgical manufacturing engineering; Metallurgisk produktionsteknik;

    Sammanfattning : Al–O relations in iron were investigated. Pure iron with varying Al content was equilibrated at 1873 K. The oxygen content of iron with higher Al content than 1.0 mass % was found to be much lower than previous works, while the oxygen content for Al content less than 1 mass% was found to be slightly higher. LÄS MER

  3. 2. Mathematical modeling of selected ladle operations

    Författare :Lage Jonsson; KTH; []
    Nyckelord :TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The traditional approach to modeling ladle processes involvea critical survey of the thermodynamic aspects of the processincluding mass and heat balantes at the macroscopic level. Onthe other hand, the macrokinetics, specific to the reactor haveoften been studied separately, using computational fluiddynamits. LÄS MER

  4. 3. Thermodynamic Studies of the Fe-Pt System and “FeO”-Containing Slags for Application Towards Ladle Refining

    Författare :Patrik Fredriksson; KTH; []
    Nyckelord :Thermodynamics; Activity; Galvanic cell; Calorimetry; Gas equilibration technique; Iron-platinum alloys; FeO; Slags; Modelling; Ladle;

    Sammanfattning : In the present work, the thermodynamic activites of ironoxide, denoted as "FeO" in the slag systems Al2O3-"FeO", CaO-"FeO", "FeO"-SiO2, Al2O3-"FeO"-SiO2, CaO-"FeO"-SiO2and "FeO"-MgO-SiO2were investigated by employing the gasequilibration technique at steelmaking temperatures. Thestrategy was to expose the molten slag mixtures kept inplatinum crucibles for an oxygen potential, determined by aCO/CO2-ratio. LÄS MER

  5. 4. A Study of the Initial Mould Filling during Up-hill Ingot Casting

    Författare :Line Hallgren; Pär Jönsson; Anders Tilliander; Seppo Louhenkilpi; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA; swirl; ingot casting; filling; red eye;

    Sammanfattning : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. LÄS MER