Sökning: "Orthotropic"
Visar resultat 6 - 10 av 62 avhandlingar innehållade ordet Orthotropic.
6. Contact loading on stressed orthotropic half-plane : analytical and numerical studies
Sammanfattning : .... LÄS MER
7. The modified Iosipescu shear test for orthotropic materials
Sammanfattning : AbstractThe Iosipescu shear test, also known as asymmetric four point bending of a V-notched beam,is frequently used for measuring in-plane shear properties of composites. The ASTM standard(ASTM D-5379-05) regulates how the test is to be performed. LÄS MER
8. Mechanisms of Blister Formation on Concrete Bridge Decks with Waterprooving Asphalt Pavement Systems
Sammanfattning : Bridge decks are commonly subjected to harsh environmental conditions that often lead to serious corrosion problems triggered by blisters under the hot mix asphalt bridge deck surfacing and secretly evolving during weather exposure until damage is often detected too late. Blisters may form under both the waterproofing dense mastic asphalt layer or under the waterproofing membrane which is often applied as additional water protection under the mastic asphalt (MA). LÄS MER
9. Industrial framework for hot-spot identification and verification in automotive composite structures
Sammanfattning : The automotive industry needs to reduce energy consumption to decrease environmental impact. This can be achieved by reducing the weight of cars, which would consequently reduce the energy consumption and emission of greenhouse gases. LÄS MER
10. Nonlinear Creep Model of Paper and Corrugated Board Materials
Sammanfattning : Models of the nonlinear creep behavior of paper, and of the global buckling , local buckling and creep buckling of corrugated board have been developed. The studies of creep and buckling were limited to climate conditions with constant relative humidity. First the short-term elastic buckling of corrugated board panels was studied. LÄS MER