Sökning: "OpenFOAM."

Visar resultat 6 - 10 av 60 avhandlingar innehållade ordet OpenFOAM..

  1. 6. RANS Simulations of Interaction between Premixed Flame and Turbulence using OpenFOAM Library

    Författare :Ehsan Yasari; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Modeling; Turbulent flow; FSC model; Premixed turbulent combustion; OpenFOAM; Simulation; Countergradient turbulent transport; TFC model;

    Sammanfattning : Unsteady multi-dimensional numerical simulation of turbulent flames is a widely recognized tool for research and development of future internal combustion engines capable of satisfying stringent requirements for ultra-low emission and highly efficient energy conversion. To attain success, such simulations need, in particular, elaborated CFD software and predictive models of turbulent burning. LÄS MER

  3. 7. Towards Full Predictions of the Unsteady Incompressible Flow in Rotating Machines, Using OpenFOAM

    Författare :Olivier Petit; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Turbulent Flow; Sliding Grid; Hydro Power; Kaplan Turbine; OpenFOAM; CFD;

    Sammanfattning : The main objective of the present work is to validatemethodologies for accurate numerical predictions of the incompressible flow ofwater in the U9 Kaplan turbine model. The term “prediction” implies that the useof detailed experimental data for boundary conditions should be avoided, andthat all important features of the studied case should be included. LÄS MER

  4. 8. Simulation of Combustion and Mixture Formation for Gasoline Direct Injection Engine Application

    Författare :Chen Huang; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VSB2; Reitz-KHRT; gasoline surrogate; LISA; sensitivity study.; Reitz-Diwakar; Trajectory collision; laminar flame speed; chemical kinetics; TAB; Rosin-Rammler; ignition delay; OpenFOAM; ethanol; O Rourke collision; SMD; hollow cone spray; liquid penetration;

    Sammanfattning : The development and introduction of new engine technologies are primarily motivated by the need to comply with increasingly stringent emissions legislation and to reduce fuel consumption. One of the most important of these new engine technologies is direct gasoline injection, which is considered to be an important and cost-effective measure to meet both targets. LÄS MER

  5. 9. CFD of Air Flow in Hydro Power Generators

    Författare :Pirooz Moradnia; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; OpenFOAM; MultipleReferenceFrame; CFD; Generator; Launder-Sharma k-ε;

    Sammanfattning : The air flow through a generator has been numerically investigated with different rotor and stator designs to give a better understanding of the flow for cooling purposes. A simple rotor design has been chosen to start with, and modified through a set of changes, where stepwisemodifications have been imposed to the design of the rotor and the stator. LÄS MER

  7. 10. Investigation of Melt Pool Thermo-hydrodynamic Behaviour inLaser Beam Welding ofTi-6Al-4V through Numerical Simulation

    Författare :Seyyed Mohammad Ali Noori Rahim Abadi; Isabelle Choquet; Fredrik Sikström; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser beam welding; Beam shaping; Absorptivity; Conductionmode welding; Free surface deformation; Computational Fluid Dynamics; OpenFOAM.; Strålformning; Absorptivitet; Värmeledningssvetsning; Ytdeformation; Computational Fluid Dynamics; OpenFOAM.; Production Technology; Produktionsteknik;

    Sammanfattning : Laser is an efficient and widely used heat source in metal processing suchas welding and additive manufacturing. It has some great advantages compared to the other conventional heat sources like electron beam and arc namely: ability of handling complicated joint geometries and producing large components. LÄS MER