Sökning: "Non-uniformity"

Visar resultat 1 - 5 av 29 avhandlingar innehållade ordet Non-uniformity.

  1. 1. Through air drying : Thermographic studies of drying rates, drying non-uniformity and infrared assisted drying

    Författare :Aron Tysén; Lars Nilsson; Shri Ramaswamy; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Through air drying; TAD; Drying; Dewatering; Water removal; Infrared drying; Non-uniformity; Variability; Formation; Thermography; Tissue; Fabric; Wire; Pulp; Grammage; Chemical Engineering; Kemiteknik;

    Sammanfattning : The removal of water is an integral part of papermaking. The drying process is responsible for a great share of the energy used in the paper machine. Premium grade tissue products are dried by through air drying. Large volumes of natural gas are burned to heat the air drawn through the paper web to achieve the drying. LÄS MER

  3. 2. Absorption non-uniformity characterisation and its impact on flexographic ink distribution of coated packaging boards

    Författare :Sofia Thorman; Li Yang; Göran Ström; Magnus Lestelius; Janet Preston; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Liquid absorption; Absorption non-uniformity; Characterisation; Measurement technique; Print Mottle; Flexography; Coated packaging boards; Chemical Engineering; Kemiteknik;

    Sammanfattning : There are high demands on flexographic print quality to be sufficiently high and consistent in order to create a competitive packaging. At the same time the production efficiency need to be high. Printers thus need to achieve the same quality every time and quickly start-up new printing jobs. LÄS MER

  4. 3. Through air drying : The influence of formation and pulp type on non-uniform drying and air flow

    Författare :Aron Tysén; Christophe Barbier; Lars Nilsson; Hannes Vomhoff; Stig Stenström; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Drying; Dewatering; Water removal; Moisture; Non-uniformity; Variability; Tissue; TAD; Through air drying; Thermography; Formation; Pulp; Chemical Engineering; Kemiteknik;

    Sammanfattning : The removal of water is an integral part of tissue paper production. Through air drying (TAD) is used for water removal when producing premium tissue grade products, however, at the price of higher energy demand. A better understanding of TAD may therefore lower the energy demand. LÄS MER

  5. 4. Where did the ink go? : The effect of liquid absorption on ink distribution in flexography

    Författare :Sofia Thorman; Li Yang; Magnus Lestelius; Martti Toivakka; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; flexographic printing; print mottle; ink trapping; absorbency; absorption non-uniformity; water-interference mottle; Chemical Engineering; Kemiteknik;

    Sammanfattning : The appearance of a print is affected by the individual ink layers. If the ink is unevenly distributed on the substrate it lowers the quality. This thesis puts focus on how the liquid absorbency of a coated substrate impacts on the ink distribution in flexographic printing. LÄS MER

  7. 5. Reactions with radioactive beams and development of scintillator-based detector systems

    Författare :Alexander Knyazev; Kärnfysik; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Nuclear physics; Reactions; Detectors; SImulation; Light transport simulation; Calorimetry; Fysicumarkivet A:2020:Knyazev;

    Sammanfattning : An experiment on elastic scattering of 15 C on 208 Pb at an energy of 65 MeVwas performed at ISOLDE (CERN) exploiting the advantages of the ISOL te-chinique. The measurement showed in increase of the reaction cross section to3035 mb with respect to 12 C, confirming the results obtained at 80 MeV/u. LÄS MER