Sökning: "Nitrogen oxides"

Visar resultat 16 - 20 av 178 avhandlingar innehållade orden Nitrogen oxides.

  1. 16. The Effects of Morphology and Surface Oxidation of Stainless Steel Powder in Laser Based-Powder Bed Fusion

    Författare :Dmitri Riabov; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; additive manufacturing; powder surface; 316L stainless steel; oxides; oxidation; laser based-powder bed fusion; morphology; powder properties; powder production;

    Sammanfattning : Laser based-powder bed fusion (LB-PBF) is one of the many techniques within additive manufacturing (AM) that allows for near net shape manufacturing of metallic components. By using powder feedstock, it is possible to spread thin layers of powder and further selectively fuse powder in a repetitive manner until the component is completed. LÄS MER

  3. 17. Inclusions and/or Particles Engineering for Grain Refining Purposes in Ferritic Fe-20mass%Cr alloys

    Författare :Jesper Janis; Pär Jönsson; Keiji Nakajima; Lauri Holappa; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Inclusions; Particles; Grain size; High Cr; Ferritic; Grain refining; Solidification; Pinning effect; Stainless steel; Oxides; Nitrides; Metallurgical process engineering; Metallurgisk processteknik;

    Sammanfattning : Compared to more common used austenitic stainless steels, ferritic stainless steels contain very low amounts of the expensive alloying element Ni. In addition, they have good corrosion properties, but are sometimes suffering from poor weldability and bad mechanical properties. LÄS MER

  4. 18. Deformation and Fatigue Behaviour of Porous and Dense Austenitic Stainless Steel

    Författare :Ulf Lindstedt; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; mechanical properties; austenitic stainless steel; PM steel; nitrogen; small cracks; previous particle boundaries; microplasticity; grain size dependence; fatigue; porosity;

    Sammanfattning : PM stainless steels are increasing in use and are expected to do so in the future. A lot of work has been carried out concerning production and sintering of stainless steel powders and on the resulting corrosion behaviour. The deformation behaviour of these materials is less studied. LÄS MER

  5. 19. NOx formation in iron ore rotary kilns

    Författare :Rikard Edland; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; rotary kiln; Grate-Kiln process; emissions control; combustion chemistry; Nitrogen oxides;

    Sammanfattning : Iron ore pellets are often produced using the so-called Grate-Kiln process, which is designed to oxidize the magnetite (Fe3O4) to hematite (Fe2O3) and to sinter the pellets so they can be used in steel manufacturing. The heat required for this process comes from the combustion of a pulverized fuel in a rotary kiln, involving the formation of a jet flame. LÄS MER

  7. 20. Bio-Inspired Urea Dosing and NOx Conversion : using a Biomimetic Effervescent Injector

    Författare :Peter Larsson; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Bio-Inspired; Biomimetics; Bombardier Beetle; AdBlue; DEF; AUS-32; SCR; Exhaust After-treatment; Dosing; Nitrogen Oxides;

    Sammanfattning : Transport of people and freight on-road have a big impact on the total energy use in the world. The majority of these transports is propelled with diesel engines and the reason is simply that the diesel engine is better than the gasoline engine due to lower fuel consumption. But the cost of this is the increase in dangerous nitrogen oxides (NOx). LÄS MER