Sökning: "Ni-based"

Visar resultat 1 - 5 av 41 avhandlingar innehållade ordet Ni-based.

  1. 1. High Temperature Oxidation and Corrosion of Ni-Based Superalloys for Industrial Gas Turbines

    Författare :Haiping Lai; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; H2O; Ni-based superalloys; Pt; electron microscopy.; surface treatment; atmosphere Na2SO4; SO2; coating; oxide scale;

    Sammanfattning : High temperature oxidation and corrosion of Ni-based superalloys used for blades in industrial gas turbines was studied using advanced high-resolution electron microscopy methods. Both coated and non-coated alloys were tested. LÄS MER

  3. 2. Ni-based coatings for high temperature corrosion protection

    Författare :Esmaeil Sadeghimeresht; Shrikant V. Joshi; Nicolaie Markocsan; Petri Vuoristo; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Thermal Spray Coating; HVAF; High Temperature Corrosion Protection; Composition; Microstructure; Dispersed Oxide; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Biomass/waste-fired boilers severely suffer from high temperature corrosion of critical load-bearing components, e.g. water-wall and superheater tubes, due to presence of Cl-containing corrosive species. LÄS MER

  4. 3. Weld Cracking in Precipitation Hardening Ni-based Superalloys

    Författare :Fabian Hanning; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; welding; post weld heat treatment; weldability; Nickel based superalloys; strain age cracking; weld cracking;

    Sammanfattning : Manufacturing of hot structural components for aero engines requires the materials being used to be weldable. The high demands on strength and temperature resistance make nickel based superalloys the material of choice for this application. LÄS MER

  5. 4. Material Solutions for Mitigating High Temperature Corrosion in Biomass- and Waste-fired Boilers - Utilizing Novel FeCrAl Alloys and HVAF-sprayed Ni-based Coatings

    Författare :Johan Eklund; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Waste; HVAF; High temperature corrosion; Biomass; FeCrAl alloys; Ni-based coatings; Silicon;

    Sammanfattning : Combustion of biomass and waste for heat and electricity production is a promising alternative to fossil fuels and is thereby an important step towards a more sustainable future. However, due to substantial amounts of alkali- and chlorine-containing species as well as moisture in biomass and waste, the combustion of these results in a highly corrosive environment which accelerates the degradation of steel components in the boiler, drastically increasing the maintenance costs. LÄS MER

  7. 5. High Temperature Fatigue Crack Growth in a Ni-based Superalloy : Modelling Including the Interaction of Dwell Times

    Författare :Erik Storgärds; Kjell Simonsson; Johan Moverare; Tomas Månsson; Bo Alfredsson; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Safe life of gas turbines is always of major concern for manufacturers in order to ensure passenger safety and stable continuous power output. An increasing amount of resources have been put into research and development to assure that all safety aspects are covered in the design of new turbines and to ensure that enough frequent service intervals are scheduled to avoid complications. LÄS MER