Sökning: "Multiple injection strategy"

Visar resultat 1 - 5 av 12 avhandlingar innehållade orden Multiple injection strategy.

  1. 1. Spray combustion with multiple-injection in modern engine conditions

    Författare :Ahmad Hadadpour; Strömningsteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spray combustion; Multiple-injection; Internal combustion engine; LES; FGM; ESF;

    Sammanfattning : Combustion of fuel in diesel engines emits substances harmful to the environment such as soot. These emissions can be reduced by either in-cylinder treatments or after-treatments. One of the common in-cylinder treatments is multiple-injection, which divides a single fuel injection to multiple smaller injections. LÄS MER

  3. 2. On the Combustion Characteristics of Closely-Coupled LD Diesel Injection Strategies

    Författare :Michael Denny; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Diesel combustion; Closely-Coupled Pilot; Closely-Spaced Pilot; Combustion Noise; Heat release rate shaping; Multiple-injection strategy; Formaldehyde PLIF;

    Sammanfattning : Multiple-pilot injection strategies with both moderate and short time separations (dwells) are investigated in a light-duty diesel engine. Both conventional and optical engine experiments are performed. LÄS MER

  4. 3. High Octane Number Fuels in Advanced Combustion Modes for Sustainable Transportation

    Författare :Amir Bin Aziz; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Octane number; Low temperature combustion LTC ; Ignition delay; Methanol; HCCI; PPC; Multiple injection strategy; φ-stratification;

    Sammanfattning : The research community recently proposed a low-temperature combustion (LTC) concept that can simultaneously reduce Nitrogen Oxides (NOx) and soot emissions while maintaining high engine efficiency. Given that diesel fuel is prone to preignition with early injection, gasoline-like fuel with high octane number is utilised to provide sufficient ignition delay and extend the load range. LÄS MER

  5. 4. Management of technology in the process industries:  Matching market and machine

    Författare :Peter Samuelsson; Pär Jönsson; Rob Boom; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; process industries; manufacturing; innovation; configuration; strategizing; capability; configuration modelling; process industries; production system; physical modelling; AOD; converter geometry; injection; mixing times; electric arc furnace; EAF; post-combustion; high-impedance; network disturbances; operational results; Metallurgical process science; Metallurgisk processvetenskap;

    Sammanfattning : The process industries span multiple industrial sectors and constitute a substantial part of the entire manufacturing industry. Since companies belonging to this family of industries are often very asset intensive, their ability to respond to changes is often limited in the short term. LÄS MER

  7. 5. Design and Optimization of In-Cycle Closed-Loop Combustion Control with Multiple Injections

    Författare :Carlos Jorques Moreno; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Diesel Combustion; Pilot-Main Injection; Pilot Mass Estimation; Cylinder Volume Estimation; Bayesian Estimation; In-Cycle Combustion Controllability; In-Cycle Combustion Control; Model Predictive Combustion Control; Stochastic Combustion Optimization; Hardware Quantification;

    Sammanfattning : With the increasing demand of transportation, biofuels play a fundamental role in the transition to sustainable powertrains. For the increased uncertainty of biofuel combustion properties, advanced combustion control systems have the potential to operate the engine with high flexibility while maintaining a high efficiency and robustness. LÄS MER