Sökning: "Microstructure Formation"
Visar resultat 6 - 10 av 284 avhandlingar innehållade orden Microstructure Formation.
6. Microstructure and properties of welds in the lean duplex stainless steel LDX 2101
Sammanfattning : Duplex stainless steels can be very attractive alternatives to austenitic grades due to their almost double strength at equal pitting corrosion resistance. When welding, the duplex alloys normally require addition of filler metal, while the commodity austenitic grades can often be welded autogenously. LÄS MER
7. Microstructure Formation During Solidification and Solid State Transformation in Compacted Graphite Iron
Sammanfattning : Compacted graphite iron (CGI) is rapidly becoming an attractive alternative material for engine components in the automotive industry, replacing lamellar graphite iron (LGI) in applications where high mechanical strength is desired. However, the gain in mechanical strength comes with a cost; thermal conductivity, process control and machining are three areas that are more challenging for CGI. LÄS MER
8. Microstructure and Gelation Behaviour of High Methoxyl and Low Methoxyl Pectin Gels and their Mixtures
Sammanfattning : The objective of this thesis was to explore the functional behaviour of high methoxyl (HM), low methoxyl (LM) and mixed HM/LM pectin gels of different chemical characteristics with emphasis on microstructure and kinetic rheological behaviour. The rheological properties and the structure of pectin gel networks were investigated for pectins under different sucrose, calcium and pH conditions by the means of oscillatory measurements and transmission electron microscopy (TEM). LÄS MER
9. On the Residual Stresses and Microstructure Formation of Aluminum-Silicon Cast Alloys
Sammanfattning : Cast aluminum-silicon alloys are being increasingly used in automotive and aerospace industries for critical structure applications because of their excellent castability, low density, acceptable mechanical properties and low cost. Different casting and heat treatment parameters largely affect the microstructure and residual stress of the components, which in turn, has a great impact on their mechanical properties. LÄS MER
10. Flow processing and gel formation for producing biopolymer drops with functional shapes and diffusion properties
Sammanfattning : This thesis focuses on the development of novel processes which combine flow-induced drop deformation and simultaneous temperature-induced gel formation in order to create shaped biopolymer drops. The drops are functional in terms of rheology and diffusion properties, factors strongly influencing the consistency of food products and flavour or drug release. LÄS MER