Sökning: "Materialteknik Bearbetnings-"

Visar resultat 1 - 5 av 351 avhandlingar innehållade orden Materialteknik Bearbetnings-.

  1. 1. Heterogeneous deformation of multi-phase engineering materials - an in-situ neutron diffraction study

    Författare :Nitesh Raj Jaladurgam; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Eutectic high entropy alloys; in-situ neutron diffraction; Deformation mechanisms; Superalloys; Electron microscopy;

    Sammanfattning : Gas turbines are complex power generation systems used in aerospace or land-based-power stations. Materials such as Ni-base superalloys are involved in the combustion zone of these machines, which continuously experiences harsh environments with loading at high temperatures. LÄS MER

  3. 2. Cold spray Cr-coated Optimized ZIRLO claddings: an option for accident tolerant fuels

    Författare :Andrea Fazi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cr coating; atom probe tomography; cold spray; accident tolerant fuel;

    Sammanfattning : Accident tolerant fuel development has started with the aim of providing nuclear fuels able to endure severe accident conditions. Research in this field has also sparked a wave of material renewal in the nuclear industry that had being delayed for the last few decades. LÄS MER

  4. 3. Influence of combined thermal and mechanical loadings on pearlitic steel microstructure in railway wheels and rails

    Författare :Dimitrios Nikas; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Low cycle fatigue LCF ; Wheel steels; Hardness; TEM; Thermal effects; EBSD; Rail steels; Pearlite; Multiaxial fatigue; Spheroidisation; Materials Science;

    Sammanfattning : One of the most important aspects in railway operation is the interaction between rail and wheel. The contact patch between these two components is around the size of a small coin, and since high loads act on this small area, stresses will give rise to wear and damage in both components. LÄS MER

  5. 4. Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties

    Författare :Jan Gustav Grolig; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; SOFC; High Temperature Corrosion; ASR; Interconnects;

    Sammanfattning : Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications. LÄS MER

  7. 5. Microstructure and plastic deformation of textured CVD alumina coatings

    Författare :Siamak Shoja; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; α-Al2O3; Texture; Coatings; TKD; Plastic deformation; Deformation mechanisms; Electron microscopy; CVD;

    Sammanfattning : It is known that the wear performance of α-alumina coatings produced by chemical vapor deposition (CVD) is significantly influenced by the type and degree of texture. However, the main reasons behind this behavior are not fully understood. This thesis contains studies of two related topics for increasing the understanding of α-alumina coatings. LÄS MER