Sökning: "Materials Engineering"
Visar resultat 6 - 10 av 4971 avhandlingar innehållade orden Materials Engineering.
6. Influence of deformation and environmental degradation of Inconel 792
Sammanfattning : Industrial gas turbines are often used as a mechanical drive for pumps and compressors or in power generation as an electric power supply. The gas turbine has for many years been a popular engine due to its flexibility with respect to different types of fuel and due to a design, that enables a high power-to-weight ratio. LÄS MER
7. On the Design Considerations for Thermal Energy Storage with Phase Change Materials: Material Characterization and Modelling
Sammanfattning : Integrating thermal energy storage (TES) technologies to a process enables storing and releasing thermal energy on demand. Depending on the implementation, this may lead to economic and ecological improvements, e.g. by shifting the peak demand to off-peak hours or by increasing the share of utilized renewable energy. LÄS MER
8. Heat Transfer Aspects of Using Phase Change Material in Thermal Energy Storage Applications
Sammanfattning : Innovative methods for providing sustainable heating and cooling through thermal energy storage (TES) have gained increasing attention as heating and cooling demands in the built environment continue to climb. As energy prices continue to soar and systems reach their maximal capacity, there is an urgent need for alternatives to alleviate peak energy use. LÄS MER
9. Thermal insulation of the combustion chamber in a light duty diesel engine
Sammanfattning : Reduction of heat loss from the combustion chamber in an engine has great potential to decrease fuel consumption and CO2 emissions. Research on thermal barrier coatings (TBC) has been performed since the early eighties to address this potential. LÄS MER
10. Detection of Partial Discharges at Fast Rising Voltages
Sammanfattning : The present demand for higher efficiency and flexibility in the energy sector has ledto an increased use of power electronic generated waveforms as these allow energyconversion between different frequencies including DC. The generated waveformsare usually synthesized by so called Pulse Width Modulation (PWM) techniques,where the desired waveform is approximated by a number of square shaped pulseswith a short rise time. LÄS MER