Sökning: "Material characterization"

Visar resultat 1 - 5 av 962 avhandlingar innehållade orden Material characterization.

  1. 1. Characterization of factors interacting in CGI machining : machinability - material microstructure - material physical properties

    Författare :Anders Berglund; Cornel Mihai Nicolescu; Tero Stjernstoft; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CGI; Compacted Graphite Iron; milling; cast iron; machinability; material microstructure; material physical properties; CGI; kompaktgrafitjärn; fräsning; gjutjärn; skärbarhet; mikrostruktur; materialegenskaper; Manufacturing engineering; Produktionsteknik;

    Sammanfattning : The Swedish truck industry is forced to find new material solutions to achieve lighter engines with increased strength. Customers and new environmental regulations demand both higher specific power and more environmentally friendly trucks, and this places a rising pressure on the manufactures. LÄS MER

  2. 2. Geometallurgical study of historical tailings from the Yxsjöberg tungsten mine in Sweden : Characterization and reprocessing options

    Författare :Jane Mulenshi; Jan Rosenkranz; Saeed Chehreh Chelgani; Pablo Brito-Parada; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Critical raw materials; Historical tailings; Tungsten; Scheelite; Geometallurgical approach; Characterization; Beneficiation; Reprocessing; Gravity separation; Magnetic separation; Flotation; Mineral Processing; Mineralteknik; Centrumbildning - Centrum för avancerad gruvteknik och metallurgi CAMM ; Centre - Centre for Advanced Mining Metallurgy CAMM ;

    Sammanfattning : Tungsten (W) is listed among the European Union (EU) critical raw materials (CRMs) for its supply risk and economic importance. Primarily, tungsten is produced from scheelite and wolframite mineral ores with 0.08-1.5% tungsten trioxide (WO3) grade. LÄS MER

  3. 3. Development of Nanostructured Tungsten Based Composites for Energy Applications

    Författare :Mazher Ahmed Yar; Mamoun Muhammed; Per-Olov Käll; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tungsten; Nano-tungsten; ODS tungsten; W-La2O3; W-Y2O3; SPS; Plasma-facing materials; Armour material; fusion material;

    Sammanfattning : Tungsten (W) based materials can be used in fusion reactors due to several advantages. Different fabrication routes can be applied to develop tungsten materials with intended microstructure and properties for specific application including nanostructured grades. LÄS MER

  4. 4. Modelling Aspects in Forming and Welding of Nickel-Base Superalloys

    Författare :Lluís Pérez Caro; Mats Oldenburg; Eva-Lis Odenberger; Juan Carlos Cante Teran; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; alloy 718; Haynes 282; cold forming; hot forming; material characterization; GISSMO; welding; heat treatment; manufacturing chain; springback; shape distortions; dynamic strain aging; DSA; microstructure; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : The reduction of fuel consumption and carbon dioxide emissions are currently a key factor for the aviation industry because of major concerns about climate change and more restrictive environmental laws. One way to reduce both fuel consumption and CO2 emissions is by significantly decreasing the weight of vehicles while increasing the efficiency of the engine. LÄS MER

  5. 5. The effect of microstructural features, defects and surface quality on the fatigue performance in Al-Si-Mg Cast alloys

    Författare :Toni Bogdanoff; Ehsan Ghassemali; Salem Seifeddine; Anders E.W. Jarfors; Ru Peng; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminum-Silicon alloys; defects; material characterization; fatigue performance; digital image correlation;

    Sammanfattning : Global warming is driving industry to manufacture lighter components to reduce carbon dioxide (CO2) emissions. Promising candidates for achieving this are aluminium-silicon (Al-Si) cast alloys, which offer a high weight-to-strength ratio, excellent corrosion resistance, and good castability. LÄS MER