Sökning: "Maskinteknik Rymd- och flygteknik"

Visar resultat 6 - 10 av 156 avhandlingar innehållade orden Maskinteknik Rymd- och flygteknik.

  1. 6. Numerical investigation of tonal noise sources from centrifugal fan

    Författare :Martin Ottersten; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Computational Aeroacoustics; Tonal Noise; Centrifugal Fan; Blade Passing Frequency;

    Sammanfattning : Heating, ventilating, and air conditioning systems (HVAC) are today an important part of many people's life. They provide a sufficient amount of airflow with the correct temperature, quality, and humidity. The negative side is the noise it produces. Many improvements have been made in building development to reduce noise from the environment. LÄS MER

  3. 7. Improving Fixed Wing UAV Endurance, by Cooperative Autonomous Soaring

    Författare :Klas Andersson; Petter Ögren; Fredrik Bruhn; KTH; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; UAV; Autonomous soaring; Cooperative soaring; Computer Science; Datalogi; Flyg- och rymdteknik; Aerospace Engineering;

    Sammanfattning : The ever-expanding use and development of smaller UAVs (Unmanned Aerial Vehicles) has highlighted an increasing demand for extended range and endurance for this type of vehicles. In this thesis, the development of a concept and system for autonomous soaring of cooperating unmanned aerial vehicles is presented. LÄS MER

  4. 8. Modal Analysis of Supersonic Flow Separation in Nozzles

    Författare :Ragnar Larusson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Separated Nozzle Flow; Dynamic Mode Decomposition; Hybrid RANSLES; CFD; Modal Analysis; Arnoldi;

    Sammanfattning : Operating a convergent-divergent nozzle under overexpanded conditions can lead to supersonic flow separation in the divergent section of the nozzle. In this case, an attached oblique shock wave forms at the separation base. LÄS MER

  5. 9. Reduction of Aerodynamic Forcing inTransonic Turbomachinery : Numerical Studies on Forcing Reduction Techniques

    Författare :Florian Fruth; Torsten Fransson; Damian Vogt; Ronald Mailach; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Forced Response; Aerodynamic Forcing; Efficiency; Blade Count Ratio; Clocking;

    Sammanfattning : Due to more and more aggressive designs in turbomachinery, assuring the structural integrity of its components has become challenging. Also influenced by this trend is blade design, where lighter and slimmer blades, in combination with higher loading, lead to an increased risk of failure, e.g. in the form of blade vibration. LÄS MER

  7. 10. On the Design of Functionally Integrated Aero-engine Structures: Modeling and Evaluation Methods for Architecture and Complexity

    Författare :Visakha Raja; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Product Architecture; Aero-engine Structures; Configurable Components; Load Paths; Design Product Complexity; Functionally Integrated Product Architecture; Product Development; Structural Complexity; Function–Means Modeling;

    Sammanfattning : The drive for airplanes with radically reduced fuel consumption and emissions motivates engine manufacturers to explore innovative engine designs. The novelty of such engines results in changed operating conditions, such as newly introduced constraints, increased loads or rearranged interfaces. LÄS MER