Sökning: "MSE"
Visar resultat 16 - 20 av 49 avhandlingar innehållade ordet MSE.
16. A study of flow fields during filling of a sampler
Sammanfattning : More and more attention has been paid to decreasing the number and size of non-metallic inclusions existing in the final products recently in steel industries. Therefore, more efforts have been made to monitor the inclusions' size distributions during the metallurgy process, especially at the secondary steelmaking period. LÄS MER
17. Growth and Characterization of Metastable Wide Band-Gap Al1-xInxN Epilayers
Sammanfattning : InN to 6.2 eV for AlN, which opens possibilities to engineer opto-electronic devices operating from infra-red to deep ultra-violet wavelengths. Al1-xInxN with the alloy composition x~0.2 can also be used as a lattice-matched electron confinement layer for GaN based electronic devices. LÄS MER
18. Slag inclusion formation during solidification of steel alloys and in cast iron
Sammanfattning : This thesis explores the formation of segregation and inclusions during solidification of steel and cast iron. A better understanding of the formation mechanism should result in decreasing fraction of defects during solidification of ingot and strand material. LÄS MER
19. A study of slag-steel-inclusion interaction during Ladle treatment
Sammanfattning : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. LÄS MER
20. Effect of swirling blade on flow pattern in nozzle for up-hill teeming
Sammanfattning : The fluid flow in the mold during up-hill teeming is of great importance for the quality of the cast ingot and therefore the quality of the final steel products. At the early stage of the filling of an up-hill teeming mold, liquid steel enters, with high velocity, from the runner into the mold and the turbulence on the meniscus could lead to entrainment of mold flux. LÄS MER