Sökning: "Low alloy steel"

Visar resultat 1 - 5 av 87 avhandlingar innehållade orden Low alloy steel.

1. 1. Modeling framework for ageing of low alloy steel

   Författare :Magnus Boåsen; Pål Efsing; Jonas Faleskog; Carl F. O. Dahlberg; Christian Niordson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Low alloy steel; length scale effects; size effects; plasticity; cleavage fracture; brittle fracture; weakest link; ageing; weld metal; Hållfasthetslära; Solid Mechanics;

   Sammanfattning : Ageing of low alloy steel in nuclear applications commonly takes the form as a hardening and an embrittlement of the material. This is due to the evolution of the microstructure during irradiation and at purely thermal conditions, as a combination or separate. LÄS MER

3. 2. Laser Based Powder Bed Fusion of Plain Carbon and Low-Alloy Steels: Microstructure and Processability

   Författare :William Hearn; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Low-Alloy Steel; Additive Manufacturing; Lack of Fusion Porosity; Laser Based Powder Bed Fusion; Plain Carbon Steel; Intrinsic Heat Treatment; Keyhole Porosity; Cold Cracking;

   Sammanfattning : Despite the prominence of laser based powder bed fusion (LB-PBF) as an additive manufacturing technique, the number of alloys that have been approved for the process remains limited. In traditional manufacturing, ferrous alloys are the most common alloy group, consisting primarily of plain carbon and low-alloy steels. LÄS MER

4. 3. Development of Structural Steels for Powder Bed Fusion - Laser Beam

   Författare :William Hearn; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; tensile properties; in situ tempering; process development; martensite; additive manufacturing; cold cracking; low-alloy steel; structural steel; powder bed fusion – laser beam; carbon steel;

   Sammanfattning : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. LÄS MER

5. 4. Laser cladded steel - microstructures and mechanical properties of relevance for railway applications

   Författare :Simon Niederhauser; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fe-Cr alloy; Carbon Steel; Microstructure; Internal Stresses; HAZ; Laser Cladding; Co-Cr alloy; Cracking Behaviour; Mechanical Properties; Low Cycle Fatigue;

   Sammanfattning : Owing to increased requirements like increased axle load for railway wheels and rails, new material have to be employed. However, these requirements are mostly surface related, which makes it appropriate to change only the surface layer while keeping the bulk unchanged. LÄS MER

7. 5. Deposit Induced Corrosion in Biofuel Combustion

   Författare :Petter Andersson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ferritic steel; high temperature corrosion; superheater; waste combustion; CFB; biofuel boiler; waterwall; alkali chloride; deposit induced corrosion; chromate; nickel-based alloy; austenitic steel; martensitic steel; waste boiler;

   Sammanfattning : Deposit induced corrosion is one of the main mechanisms for attack on heat exchangers in biofuel boilers. This severe corrosion decreases the obtainable steam temperature in boilers, thereby the efficiency in production of electricity is reduced. Deposit formation from the gas on superheater tubes are is generally referred to as fouling. LÄS MER