Sökning: "Lin Peng Ru"
Visar resultat 1 - 5 av 20 avhandlingar innehållade orden Lin Peng Ru.
1. Performance of MCrAlX coatings : Oxidation, Hot corrosion and Interdiffusion
Sammanfattning : MCrAlY coatings (M=Ni and/or Co) are widely used for the protection of superalloy components against oxidation and hot corrosion in the hot sections of gas turbines. The drive for coating systems to bestow adequate oxidation and corrosion resistance upon the components becomes urgent as an inevitable result of the necessary improvement in engine combustion efficiency and service lifetime. LÄS MER
2. Oxidation and Corrosion of New MCrAlX Coatings : Modelling and Experiments
Sammanfattning : MCrAlY coatings (“M” for Ni and/or Co) are widely used for the protection of superalloy components operated at high temperatures such as in the hot sections of gas turbines. The exposure to high temperature can cause coating degradation due to oxidation or hot corrosion at the coating surface. LÄS MER
3. Surface Integrity of Broached Inconel 718 and Influence of Thermal Exposure
Sammanfattning : Inconel 718 is a nickel-based superalloy that is extensively used as a disc material in gas turbine engines. The service life of gas turbine discs is normally governed by the modes of material degradation and fatigue failure since they work mostly at high temperatures and are subjected to cyclic mechanical loadings. LÄS MER
4. Additively Manufactured Inconel 718 : Microstructures and Mechanical Properties
Sammanfattning : Additive manufacturing (AM), also known as 3D printing, has gained significant interest in aerospace, energy, automotive and medical industries due to its capabilities of manufacturing components that are either prohibitively costly or impossible to manufacture by conventional processes. Among the various additive manufacturing processes for metallic components, electron beam melting (EBM) and selective laser melting (SLM) are two of the most widely used powder bed based processes, and have shown great potential for manufacturing high-end critical components, such as turbine blades and customized medical implants. LÄS MER
5. On the Microstructures and Anisotropic Mechanical Behaviours of Additively Manufactured IN718
Sammanfattning : Additive manufacturing (AM), also known as 3D printing, offers great design flexibility for manufacturing components with complex geometries, and has attracted significant interest in the aero and energy industries in the past decades. Among the commercial AM processes, selective laser melting (SLM) and electron beam melting (EBM) are the two most widely used ones for metallic materials. LÄS MER