Sökning: "Laser Based Powder Bed Fusion"
Visar resultat 1 - 5 av 37 avhandlingar innehållade orden Laser Based Powder Bed Fusion.
1. Spectral analysis in laser powder bed fusion
Sammanfattning : This thesis is about the investigation of the spectral interaction of electromagnetic radiation with metal powders. For this purpose, spectral data of powders for laser powder bed fusion processes are investigated in three papers using different techniques. LÄS MER
2. Powder degradation during powder bed fusion processing
Sammanfattning : Powder bed fusion (PBF) techniques, including laser-based powder bed fusion (LB-PBF) and electron beam powder bed fusion (EB-PBF), are two rapidly growing additive manufacturing (AM) processes due to their ability to produce complex geometries in near-net shapes. To attain reproducibility and repeatability in PBF processes, a consistent set of powder properties is vital. LÄS MER
3. In-situ monitoring of laser powder bed fusion applied to defect detection
Sammanfattning : Additive manufacturing technologies, particularly laser powder bed fusion (LPBF), have received much attention recently due to their numerous advantages over conventional manufacturing methods. However, the use of LPBF is still quite restricted, mainly due to two factors: its typically low productivity, which makes the technology less competitive in applications with moderate to high production volumes, and its limited reliability, particularly relevant for applications where high performance is required from the materials. LÄS MER
4. The Effects of Morphology and Surface Oxidation of Stainless Steel Powder in Laser Based-Powder Bed Fusion
Sammanfattning : Laser based-powder bed fusion (LB-PBF) is one of the many techniques within additive manufacturing (AM) that allows for near net shape manufacturing of metallic components. By using powder feedstock, it is possible to spread thin layers of powder and further selectively fuse powder in a repetitive manner until the component is completed. LÄS MER
5. Laser-based powder bed fusion of stainless steels
Sammanfattning : The aim of the present work has been to widen the knowledge of how variations within powder manufacturing affect laser-based powder bed fusion processing, and how this processing affects the microstructure and strength of stainless steels. The approach was to keep the processing parameters fixed while the powder feedstock was varied. LÄS MER