Sökning: "Lars-Erik Svensson"

Visar resultat 6 - 10 av 18 avhandlingar innehållade orden Lars-Erik Svensson.

  1. 6. Laser welding of ultra-high strength steel and a cast magnesium alloy for light-weight design

    Författare :Karl Fahlström; Lars-Erik Svensson; Leif Karlsson; Michael Rethmeier; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser welding; ultra-high strength steel; cast magnesium alloy; light-weight design; automotive industry; distortion; porosity; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : There is a strong industrial need for developing robust and flexible manufacturing methods for future light-weight design. Better performing, environmental friendly vehicles will gain competitive strength from using light weight structures. LÄS MER

  3. 7. Fatigue strength of welds in 800 MPa yield strength steels : Effects of weld toe geometry and residual stress

    Författare :Ebrahim Harati; Lars-Erik Svensson; Leif Karlsson; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fatigue strength; Residual stress; Welds; Weld toe geometry; High strength steel; Weld Impression Analysis; Laser Scanning Profiling; Structured Light Projection; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Nowadays there is a strong demand for lighter vehicles in order to increase the pay load. Through this the specific fuel consumption is decreased, the amount of greenhouse gases is lowered and the transport economy improved. One possibility to optimize the weight is to make the components from high strength steels and join them by welding. LÄS MER

  4. 8. Improving fatigue properties of welded high strength steels

    Författare :Ebrahim Harati; Lars-Erik Svensson; Leif Karlsson; Norbert Enzinger; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fatigue strength; Residual stress; Welds; Weld toe geometry; High strength steel; High frequency mechanical impact treatment; Low Transformation Temperature welding consumable; Manufacturing and materials engineering; Produktions- och materialteknik; Production Technology; Produktionsteknik;

    Sammanfattning : In recent years a strong interest has been expressed to produce lighter structures.One possible solution to reduce the weight is to utilize high strength steels and use welding as the joining method. LÄS MER

  5. 9. Cold lap formation in Gas Metal Arc Welding of steel : An experimental study of micro-lack of fusion defects

    Författare :Peigang Li; Lars-Erik Svensson; Norbert Enzinger; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tandem GMAW; old laps; lack of fusion; Spatter; Overlap; Overflow; Manganese; Silicon; Oxides; Temperature; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Cold laps are defined as micro-lack of fusion defects at the weld toe more or less parallel to the surface of the parent plate. These defects are known to negatively influence the fatigue properties of weldments. Previous studies suggest that cold lap formation can not be avoided completely in Gas Metal Arc Welding (GMAW). LÄS MER

  7. 10. Experimental study on cold lap formation in tandem gas metal arc welding

    Författare :Peigang Li; Lars-Erik Svensson; Leif Karlsson; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; GMAW; Cold lap; oxide; Tandem arc welding; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : .... LÄS MER