Sökning: "Journal Bearing"

Visar resultat 6 - 10 av 24 avhandlingar innehållade orden Journal Bearing.

  1. 6. Nonlinear dynamic analysis of vertical rotors with tilting pad journal bearings

    Författare :Gudeta Benti; Jan-Olov Aidanpää; Rolf Gustavsson; Roland Larsson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vertical rotor; tilting pad journal bearing; stiffness; damping; Machine Design; Maskinkonstruktion;

    Sammanfattning : .... LÄS MER

  3. 7. Dynamic Performance and Design Aspects of Compliant Fluid Film Bearings

    Författare :Matthew Cha; Sergei Glavatskih; Kyung-Woong Kim; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compliant bearing; dynamic performance; design aspects; Machine Design; Maskinkonstruktion;

    Sammanfattning : Due to government regulations together with health and safety reasons, there are increasing demands on reducing hazardous polluting chemicals from fossil fuel power plants. Therefore, more efforts are imposed on using renewable resources such as water, wind, solar and tide to produce clean/green electricity. LÄS MER

  4. 8. Thermo-Elasto-Hydrodynamic lubrication modeling of Tilting Pad Journal Bearings

    Författare :Philip Croné; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machine Elements; Maskinelement;

    Sammanfattning : The journal bearing is a critical machine element typically used to support rotating motion in high speed machinery. Through the generation of a hydrodynamic pressure in its thin lubricant film,which is usually in the order of 10-100μmthick depending on the diameter of the journal itself, the bearing is able to withstand large loads, both statically and dynamically, while having a very low rate of wear. LÄS MER

  5. 9. Tribological characteristics of some multi-layered Pb-free engine bearing materials

    Författare :Daniel Woldegebriel Gebretsadik; Arto Lehtovaara; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machine Elements; Maskinelement;

    Sammanfattning : Lead (Pb) containing alloys such as white metals and Cu-Pb-Sn (lining) with Pb-based overlay plating have been extensively used as materials for internal combustion engine bearings during the last several decades. However, owing to environmental and health concerns, the use of Pb containing materials in automotive engine components is being restricted. LÄS MER

  7. 10. Tribology of journal bearings under environmentally adapted lubrication with shaft oscillation

    Författare :Jan Ukonsaari; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Maskinelement; Machine Elements;

    Sammanfattning : To make the hydro power application more environmentally adapted new EALs such as synthetic esters will replace the existing mineral oils. This study aims to exploit the EALs potential in boundary lubrication, especially in slow sliding journal bearings with shaft oscillation as those supporting the Kaplan turbine blades. LÄS MER