Sökning: "Jet"

Visar resultat 21 - 25 av 529 avhandlingar innehållade ordet Jet.

1. 21. Liquid-Jet-Target Microfocus X-Ray Sources : Electron Guns, Optics and Phase-Contrast Imaging

   Författare :Tomi Tuohimaa; Hans M. Hertz; Stephen Wilkins; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; electron-impact; x-ray; brightness; liquid-jet-target; phase-contrast imaging; Engineering physics; Teknisk fysik;

   Sammanfattning : This Thesis describes the development of an electron-impact microfocus x-ray source and its application for phase-contrast imaging. The source is based on a novel, liquid-jet target concept. Stable and continuous operation can be achieved at substantially higher electron-beam power densities than conventional solid target based systems. LÄS MER

3. 22. Numerical studies of turbulent flames in wall-jet flows

   Författare :Zeinab Pouransari; Arne V. Johansson; Yves D'Angelo; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Turbulence; combustion; direct numerical simulation; wall-jet; heat release effects; mixing scales; non-premixed flame; wall heat transfer; Teknisk mekanik; Engineering Mechanics;

   Sammanfattning : The present thesis deals with the fundamental aspects of turbulent mixing and non-premixed combustion in the wall-jet flow, which has a close resemblance to many industrial applications. Direct numerical simulations (DNS) of turbulent wall-jets with isothermal and exothermic reactions are performed. LÄS MER

4. 23. Multi-Disciplinary Conceptual Design of Future Jet Engine Systems

   Författare :Konstantinos G. Kyprianidis; Stephen O. T. Ogaji; Riti Singh; Herbert Saravanmuttoo; UK Cranfield University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gas Turbine; Intercooled; Recuperated; Turbofan; Future; Simulation; Performance; Aircraft; Emissions; Multi-disciplinary; Jet Engine; Energy- and Environmental Engineering; energi- och miljöteknik;

   Sammanfattning : This thesis describes various aspects of the development of a multi-disciplinary aero engine conceptual design tool, TERA2020 (Techno-economic, Environmental and Risk Assessment for 2020), based on an explicit algorithm that considers: engine performance, engine aerodynamic and mechanical design, aircraft design and performance, emissions prediction and environmental impact, engine and airframe noise, and production, maintenance and direct operating costs.As part of this research effort, a newly-derived semi-empirical NOx correlation for modern rich-burn single-annular combustors is proposed. LÄS MER

5. 24. Flow structures in solid-liquid suspensions in mixing and confined jets

   Författare :Matthias Eng; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Lomb algorithm; macro-instabilities; stirred tank; integral length scale; solid-liquid; confined jet; LDV; parcticle flow; jet instability;

   Sammanfattning : This thesis investigates the influence of solid particles on different liquid flow systems.Large-scale periodic fluctuations such as macro instability (MI) phenomena in a mixingvessel and jet flows in a confined jet were experimentally analyzed by means of LDV. Theinfluences of different sized (0.5mm-2mm) glass particles (0%vol - 6. LÄS MER

7. 25. A Numerical Investigation on VOD Nozzle Jets

   Författare :Zhili Song; Pär Jönsson; Ola Widlund; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VOD; nozzle; jet; vaccum; CFD;

   Sammanfattning : The metallurgic process, Vacuum Oxygen Decarburization (VOD) process, is used for producing stainless steels with ultra-low carbon grades. In a VOD process, an oxygen lance is equipped with a De Laval nozzle which injects high speed oxygen gas. LÄS MER