Sökning: "Influence Coefficient"

Visar resultat 6 - 10 av 248 avhandlingar innehållade orden Influence Coefficient.

  1. 6. Influence of Water on Coarse Granular Road Material Properties

    Författare :Jonas Ekblad; Ulf Isacsson; Hervé Di Benedetto; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Highway Engineering; Granulat materials; Civil engineering and architecture; Samhällsbyggnadsteknik och arkitektur;

    Sammanfattning : Even though the practical experience of using coarse unbound granular materials is extensive, detailed knowledge on the mechanical and hydraulic behavior is to a large extent lacking. Regarding influence of water on mechanical properties, this is even more pronounced. LÄS MER

  3. 7. Acoustic scattering in ducts and influence of flow coupling

    Författare :Susann Boij; KTH; []
    Nyckelord :sound; vortex sheet; flow separation; end correction; Strouhal number; non-orthogonal modes; energy balance; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The subject of this thesis is the acoustic properties offlow duct area expansions and the influence of flow-acousticcoupling at sharp edges. For low Mach number flow, significantinteraction between the sound field and the flow field canoccur at such points of flow separation. LÄS MER

  4. 8. Friction in elasto hydrodynamically lubricated contacts : the influence of speed and slide to roll ratio

    Författare :Marcus Björling; Fredrik Sahlin; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Maskinelement; Machine Elements;

    Sammanfattning : Reducing losses in transmissions has become a high priority in the automotive market during recent years, mainly due to environmental concerns leading to regulations placed on the automotive industry to drive the development of vehicles with lower fuel consumption and CO2 emissions. Rising fuel prices and increasing environmental concerns have also made customers more prone to purchase more fuel efficient vehicles. LÄS MER

  5. 9. Thermal cracking of young concrete : partial coefficients, restraint effects and influence of casting joints

    Författare :Martin Nilsson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Structural Engineering; Konstruktionsteknik;

    Sammanfattning : Cracks can occur due to temperature induced movements during the hardening phase of concrete. Thermal cracks are not decisive for the load-bearing capacity but cause costs for repair and may reduce the life of the structure. The risk of cracking can be judged through safety values, (partial coefficients) given in building codes. LÄS MER

  7. 10. Dimensional Stability of Paper : Influence of Fibre-Fibre Joints and Fibre Wall Oxidation

    Författare :Per A. Larsson; Lars Wågberg; Mikael Lindström; Lars Berglund; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : Papper är ett mycket mångsidigt material. Trots detta finns det ett flertal egenskaper som begränsar papperets användbarhet. Ett av de större problemen med cellulosa- och lignocellulosafibrer är att de sänker sin fria energi genom att sorbera vatten, och denna sorption förändrar papperets dimensioner. LÄS MER