Sökning: "Inconel 718."
Visar resultat 1 - 5 av 31 avhandlingar innehållade orden Inconel 718..
1. Additively Manufactured Inconel 718 : Microstructures and Mechanical Properties
Sammanfattning : Additive manufacturing (AM), also known as 3D printing, has gained significant interest in aerospace, energy, automotive and medical industries due to its capabilities of manufacturing components that are either prohibitively costly or impossible to manufacture by conventional processes. Among the various additive manufacturing processes for metallic components, electron beam melting (EBM) and selective laser melting (SLM) are two of the most widely used powder bed based processes, and have shown great potential for manufacturing high-end critical components, such as turbine blades and customized medical implants. LÄS MER
2. Inconel 718 and Hydrogen
Sammanfattning : The nickel based superalloy IN718 is known to be sensitive to hydrogen, causing degradation of its mechanical properties. The degrading mechanism commonly proposed is based on an increased mobility and density of dislocations, caused by the dissolved hydrogen. This results in a decreased yield stress and a premature fracture. LÄS MER
3. Thermo-mechanical Fatigue Crack Propagation in Inconel 718
Sammanfattning : Thermo-mechanical fatigue crack propagation in Inconel 718 has been studied with different methods. In-situ observations with a scanning electron microscope (SEM) were performed, the crack propagation process was followed cycle by cycle and the influences from load, temperature, and microstructure on the crack growth were analyzed. LÄS MER
4. Adhesion strength of HVOF sprayed Inconel 718 coatings
Sammanfattning : Thermal spray technology in general is nowadays recognized as an industrial process, mature enough to apply coatings on different substrate materials that protect parts against wear, corrosion, heat, or combinations of these. The quality demands on coating homogeneity and adhesion strength are, nowhere more than in the automotive and aeronautic industries, continuously increasing. LÄS MER
5. Machinability variations in Alloy 718 —With focus on machining of turbine components
Sammanfattning : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). LÄS MER