Sökning: "Impact toughness"

Visar resultat 1 - 5 av 38 avhandlingar innehållade orden Impact toughness.

  1. 1. Toughness of Tool Steel

    Detta är en avhandling från Uppsala : Institutionen för teknikvetenskaper

    Författare :Henrik Jesperson; Håkan Engqvist; Birger Karlsson; [2011]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Toughness; Tool Steel; Heat Treatment; Temperature; Energy absorption; Impact Testing; Fracture Toughness Testing; Non-metallic Inclusions; Carbides; Nitrides; Statistics; TECHNOLOGY; TEKNIKVETENSKAP; Teknisk fysik med inriktning mot materialvetenskap; Engineering Science with specialization in Materials Science;

    Sammanfattning : Toughness is the ability to resist tensile stresses in the presence of a notch or crack. Sometimes gross cracking of industrial tools, mould or dies, occurs due to insufficient toughness. As the economic consequences of the gross cracking are serious, the toughness of industrial tool material, generally tool steel, is of paramount importance. LÄS MER

  2. 2. Mechanical Recycling of Engineering Thermoplastics using Alloying Techniques

    Detta är en avhandling från Uppsala : Institutionen för teknikvetenskaper

    Författare :Xiaodong Liu; [2001]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sandwich injection moulding; recycling; compatibilizer; in-situ compatibilization; engineering thermoplastics; J-integral; toughness; impact modifier;

    Sammanfattning : The aim of this thesis is to indicate routes by which recycled engineering thermoplastics (ETP) can be upgraded using alloying techniques. Recycled ETP have often been subjected to long-term service-induced degradation, so that the residual properties of recycled ETP need to be improved. LÄS MER

  3. 3. The fracture mechanisms in duplex stainless steels at sub-zero temperatures

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Johan Pilhagen; Pavel Korzhavy; Rolf Sandström; Kim Wallin; [2013]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Duplex stainless steel; Weldments; Delamination; Fracture toughness; Impact toughness; Cleavage fracture; Nickel;

    Sammanfattning : The aim of the thesis was to study the susceptibility for brittle failures and the fracture process of duplex stainless steels at sub-zero temperatures (°C). In the first part of the thesis plates of hot-rolled duplex stainless steel with various thicknesses were used to study the influence of delamination (also known as splits) on the fracture toughness. LÄS MER

  4. 4. Fracture toughness properties of duplex stainless steels

    Detta är en avhandling från Stockholm : KTH

    Författare :Henrik Sieurin; Rolf Sandström; Jan-Olof Nilsson; [2006]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; duplex stainless steel; fracture toughness; austenite reformation; sigma phase; material optimisation; TECHNOLOGY Materials science; TEKNIKVETENSKAP Teknisk materialvetenskap;

    Sammanfattning : Good toughness properties in base and weld material enable the use of duplex stainless steels (DSS) in critical applications. DSS offer high strength compared to common austenitic stainless steels. LÄS MER

  5. 5. Effect of Microstructure on Mechanical Properties of High Strength Steel Weld Metalsn

    Detta är en avhandling från Stockholm : KTH

    Författare :Enda Keehan; [2004]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; strength; bainite; carbon; TEM; dilatometry; microstructure; impact toughness; neural network modelling; martensite; manganese; FEGSEM; nickel;

    Sammanfattning : The effects of variations in alloying content on the microstructure and mechanical properties of high strength steel weld metals have been studied. Based on neural network modelling, weld metals were produced using shielded metal arc welding with nickel at 7 or 9 wt. %, manganese at 2 or 0.5 wt. LÄS MER