Sökning: "IC-engine"

Visar resultat 16 - 20 av 24 avhandlingar innehållade ordet IC-engine.

  1. 16. Methods for Modelling and Characterization of In-Duct Sources

    Författare :Hans Rämmal; Hans Bodén; Mats Åbom; Antonio Torregrosa; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Methods to characterize acoustic sources in flow ducts have been investigated. In the first part of this thesis a measurement procedure to characterize an air terminal device using an acoustic one-port source model based on the two microphone technique has been tested and validated. LÄS MER

  3. 17. Investigation of thermal biomass gasification for sustainable small scale rural electricity generation in Uganda

    Författare :Joseph Olwa; Torsten Fransson; KTH; []
    Nyckelord :Tar; Gasification; Biomass; SRA - Energy; SRA - Energi;

    Sammanfattning : With the increasing need for renewable energy technologies in the world, biomass fuel transformation technology is growing towards meeting that need, among others. Challenges remain certain and new innovations are being tested in bid to overcome them with the application of biomass as energy source. LÄS MER

  4. 18. Numerical Computations of Internal Combustion Engine related Transonic and Unsteady Flows

    Författare :Olle Bodin; Laszlo Fuchs; Daniel Lörstad; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; Transonic flow; Hysteresis; Shock boundary-layer interaction; Exhaust valve; Fluid mechanics; Strömningsmekanik;

    Sammanfattning : Vehicles with internal combustion (IC) engines fueled by hydrocarbon compounds have been used for more than 100 years for ground transportation. During the years and in particular in the last decade, the environmental aspects of IC engines have become a major political and research topic. LÄS MER

  5. 19. Cam Roller Contact : Surfaces and Tribology

    Författare :Frédéric Cabanettes; Bengt-Göran Rosén; Ulf Olofsson; Högskolan i Halmstad; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wear reduction; camshaft; roller; surface topography; relocation; elasto plastic rough contact; elasto hydrodynamic lubrication; Mechanical engineering; Maskinteknik;

    Sammanfattning : The automotive industry and the design of engines are strongly ruled by performance and legislation demands. In the valve train, mechanical components such as camshafts and rollers are defined by specifications including more and more constraints concerning their ability to face wear thus prolonging lifetime. LÄS MER

  7. 20. Simulations of compressible flows associatedwith internal combustion engines

    Författare :Olle Bodin; Laszlo Fuchs; Mihai Mihaescu; Michael Leschziner; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; Gas exhange; exhaust port; exhaust manifold; POD; DMD; exhaust; LES; Gasväxling; avgasport; avgasgrenrör; POD; DMD;

    Sammanfattning : Vehicles with internal combustion (IC) engines fueled by hydrocarbon compoundshave been used for more than 100 years for ground transportation.During these years and in particular the last decade, the environmental aspectsof IC engines have become a major political and research topic. LÄS MER