Sökning: "Hot extrusion"
Visar resultat 1 - 5 av 16 avhandlingar innehållade orden Hot extrusion.
1. Simulation of Stainless Steel Tube Extrusion
Sammanfattning : The simulation of hot extrusion processes is a difficult and challenging problem in process modeling. This is due to very large deformations, high strain rates and large temperature changes during the process. LÄS MER
2. Tribological aspects of aluminium extrusion dies
Sammanfattning : Extrusion is a common method to manufacture long products of aluminium, such as beams, rods and tubes. The aim of this thesis was to improve the material in the die bearing surface, and thereby the service life of extrusion dies through wear studies of actual dies, and experimental simulations. LÄS MER
3. Hot wear of aluminium extrusion dies
Sammanfattning : .... LÄS MER
4. Foaming of Some Cellulose Derivatives - Initial Studies
Sammanfattning : Fossil-based polymeric foams, based on polymers such as polystyrene and polyurethane, are important and widely employed materials due to their good mechanical properties relative their low density, the low price and the possibility for large-scale production. There are however a few disadvantages with these foamed products. LÄS MER
5. Foaming of cellulose derivatives and hemicellulose-containing materials
Sammanfattning : Fossil-based polymeric foams are important materials due to their good mechanical properties relative their low density, the low price and the possibility for large-scale production. They are widely used in cushioning, absorbing and insulation applications. There are however a few disadvantages with these foamed products. LÄS MER