Sökning: "High Velocity Oxy-Fuel HVOF"

Visar resultat 1 - 5 av 8 avhandlingar innehållade orden High Velocity Oxy-Fuel HVOF.

  1. 1. Microstructure and oxidation behavior of High Velocity Oxy-Fuel spray deposited Ti2AlC coatings

    Författare :Marie Sonestedt; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; coatings; High Velocity Oxy-Fuel HVOF ; Ti2AlC; oxidation; microstructure; SEM; TEM;

    Sammanfattning : Ti2AlC is one of the ternary carbides in the MAX phase group of materials. This group of materials have a unique combination of ceramic and metallic properties, such as machinability, high thermal conductivity, low density and oxidation resistance. LÄS MER

  3. 2. Adhesion strength of HVOF sprayed Inconel 718 coatings

    Författare :Christophe Lyphout; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Adhesion Strength; Residual Stress; Inconel 718; Thermal spray; Finite Element Method; HVOF; High Velocity Oxy-Fuel;

    Sammanfattning : Thermal spray technology in general is nowadays recognized as an industrial process, mature enough to apply coatings on different substrate materials that protect parts against wear, corrosion, heat, or combinations of these. The quality demands on coating homogeneity and adhesion strength are, nowhere more than in the automotive and aeronautic industries, continuously increasing. LÄS MER

  4. 3. Adhesion and Residual Stress Characterization of HVOF Sprayed Inconel 718 Coatings

    Författare :Christophe Lyphout; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; HVOF; Residual Stress; Inconel 718; Thermal spray; Adhesion Strength; Finite Element Method; High Velocity Oxy-Fuel;

    Sammanfattning : Thermal spray technology in general is nowadays recognized as an industrial process, mature enough to apply coatings on different substrate materials that protect parts against wear, corrosion, heat, or combinations of these. The quality demands on coating homogeneity and adhesion strength are, nowhere more than in the automotive and aeronautic industries, continuously increasing. LÄS MER

  5. 4. Characterization of Ti2AlC coatings deposited with High Velocity Oxy-Fuel and Magnetron Sputtering Techniques

    Författare :Jenny Frodelius; Lars Hultman; Jens Emmerlich; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MAX phase; Thermal Spray; PVD; Materials science; Teknisk materialvetenskap;

    Sammanfattning : This Thesis presents two different deposition techniques for the synthesis of Ti2AlC coatings. First, I have fabricated Ti2AlC coatings by high velocity oxy-fuel (HVOF) spraying. LÄS MER

  7. 5. Microstructure and properties of coatings produced by spray deposition of Ti2AlC powders

    Författare :Marie Sonestedt; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High Velocity Oxy-Fuel HVOF ; TEM; SEM; oxidation; cold spray; microstructure; Ti2AlC; coatings;

    Sammanfattning : .... LÄS MER