Sökning: "Gaser"
Visar resultat 6 - 10 av 121 avhandlingar innehållade ordet Gaser.
6. Large Eddy Simulation of Complex Turbulent Flows
Sammanfattning : This thesis concerns the Large Eddy Simulation methodology and its application to predict complex turbulent flows at high Reynolds numbers, and at times also with high Mach numbers. The meaning of the word ?complex? refers both to the presence of complex flow phenomena and the, often, complex geometry of man-made devices restricting the flow. LÄS MER
7. On the Use of Laser-Induced Incandescence for Soot Diagnostics: From Theoretical Aspects to Applications in Engines
Sammanfattning : The laser-induced incandescence technique (LII) is a laser-based diagnostic technique for measurements of soot volume fraction and particle size. The technique relies on detection of incandescent light from soot particles heated to around 4000 K using nanosecond laser pulses. LÄS MER
8. Experimental Studies of Turbulent Mixing in Impinging Jets
Sammanfattning : This thesis concerns the experimental study of mixing and flow characteristic in turbulent circular impinging jets without and with jet orifice manipulators (i.e. passive-fixed perturbations atthe nozzle exit), without and with swirl. LÄS MER
9. Modeling of Pulverised Wood Flames
Sammanfattning : The aim of the current work was at development and validation of modeling tools for simulation of pulverised wood flames in furnaces and study how different factors influence on such flames. The numerical model involves different sub-models for the physo-chemical processes, such as, two-phase flow motion, drying, devolatilization and shrinkage of particles, the formation and oxidation of volatile, tar and char, turbulence-chemistry interaction, turbulence-radiation interaction, etc. LÄS MER
10. Computational Analysis of Heat Transfer and Fluid Flow with Relevance for IC-Engine Cooling
Sammanfattning : Modern IC-engines produce more power per displaced volume and operate at higher combustion pressures and temperatures. In addition, engine structure materials such as aluminium and magnesium alloys, which are more sensitive to thermal loads, are more commonly used. LÄS MER