Sökning: "Gas Tungsten Arc simulation"
Visar resultat 1 - 5 av 6 avhandlingar innehållade orden Gas Tungsten Arc simulation.
1. Modelling of cathode-plasma interaction in short high-intensity electric arc : Application to Gas Tungsten Arc Welding
Sammanfattning : In arc welding the quality of the weld is strongly influenced by the thermal history of the workpiece which is itself governed by the electric arc heat source. The models for predicting weld properties thus need a good evaluation of the distribution of the heat input from thearc to the workpiece. LÄS MER
2. Plasma Arc Welding Simulation with OpenFOAM
Sammanfattning : A simulation tool that is valid within the field of tandem arc welding(unsteady, three dimensional thermal plasma flow) has been developed,based on the open source CFD package OpenFOAM. The validation of the electromagnetic part of the solver has been done separately using a problem with a known solution. LÄS MER
3. Microstructure model for Ti-6Al-4V used in simulation of additive manufacturing
Sammanfattning : This thesis is devoted to microstructure modelling of Ti-6Al-4V. The microstructure and the mechanical properties of titanium alloys are highly dependent on the temperature history experienced by the material. The developed microstructure model accounts for thermaldriving forces and is applicable for general temperature histories. LÄS MER
4. Microstructure and properties of welds in the lean duplex stainless steel LDX 2101
Sammanfattning : Duplex stainless steels can be very attractive alternatives to austenitic grades due to their almost double strength at equal pitting corrosion resistance. When welding, the duplex alloys normally require addition of filler metal, while the commodity austenitic grades can often be welded autogenously. LÄS MER
5. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties
Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER