Sökning: "GD-OES"

Visar resultat 1 - 5 av 6 avhandlingar innehållade ordet GD-OES.

  1. 1. Microstructure of Zirconium Alloys Oxidized in Steam

    Författare :Pia Tejland; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; ADF; TEM; Zircaloy-2; FIB-SEM; STEM; GD-OES; SPP; SEM; Zirconium; HAADF;

    Sammanfattning : Zirconium alloys are widely used in nuclear reactors as fuel cladding tubes because of their low thermal neutron capture cross-section, good corrosion properties and satisfactory mechanical properties. However, the main limiting factor of these materials is the oxidation behavior. LÄS MER

  3. 2. Surface characterization of the chromium hydroxide and basic calcic deposition layers formed on the steel cathode in the chlorate production process

    Författare :Annika Ahlberg Tidblad; KTH; []
    Nyckelord :;

    Sammanfattning : During technical service, the surface of the steel cathodein the chlorate production process changes with respect tochemical composition and morphology. Deposition of insolublespecies from the electrolyte and corrosion products from thebase metal accumulate and form surface layers that influencethe cathode activity with regards to hydrogen evolution, theprimary reaction, as well as to various parasitic reactions. LÄS MER

  4. 3. Furnace Wall Corrosion in a Wood-fired Boiler

    Författare :Yousef Alipour; Pamela Henderson; Mikko Hupa; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High Temperature Corrosion; Used-wood Fired Boilers; Furnace Wall Corrosion; Cl-induced Corrosion; 16Mo3; Nickel-based Alloys; FeCrAl Alloys; Fuel Additive; Sewage Sludge; >Thermodynamics Modelling; Högtemperaturkorrosion; Returträ Förbränningspannor; Eldstad Korrosion; klor-inducerad korrosion; 16Mo3; Nickelbaslegeringar; FeCrAl-legeringar; Bränsletillsatser; Avloppsslam; Termodynamik Modellering; Kemi; Chemistry;

    Sammanfattning : The use of renewable wood-based fuel has been increasing in the last few decades because it is said to be carbon neutral. However, wood-based fuel, and especially used wood (also known as recycled wood or waste wood), is more corrosive than virgin wood (forest fuel), because of higher amounts of chlorine and heavy metals. LÄS MER

  5. 4. High-temperature corrosion properties of chromia- and alumina-forming alloys

    Författare :Tommy Sand; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High-temperature corrosion; Alumina scale; Chromia scale; Cr-evaporation; Nitridation; Oxidation;

    Sammanfattning : Electricity production, transportation, and manufacturing industry are some of the largest sources of greenhouse gas emissions. In many cases, these processes are carried out at high temperature and energy efficiency is limited by material degradation, so-called ‘high-temperature corrosion’. LÄS MER

  7. 5. Adhesion in the wheel-rail contact under contaminated conditions

    Författare :Yi Zhu; Ulf Olofsson; Ines Lopez Arteaga; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; adhesion; wheel-rail contact; contaminants; rough surfaces;

    Sammanfattning : Railway vehicles require a certain level of adhesion between wheel and rail to operate efficiently, reliably, and economically. Different levels of adhesion are needed depending on the vehicle running conditions. LÄS MER