Sökning: "Göran Ström"

Visar resultat 1 - 5 av 11 avhandlingar innehållade orden Göran Ström.

1. 1. Surface and porous structure of pigment coatings : Interactions with flexographic ink and effects on print quality

   Författare :Erik Bohlin; Caisa Johansson; Per Edström; Göran Ström; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Coating; Pigment; Calendering; Porosity; Flexographic Printing; Print quality; Chemical Engineering; Kemiteknik;

   Sammanfattning : Each day, we are confronted with a large amount of more or less important information that we have to consider, and even in our digital society we need paper for communication, documentation and education. Much of the paper we use or are confronted by in our daily life, such as newspapers, books and packages, contains printed images or texts, and the appearance of both the print and the supporting surface is important. LÄS MER

3. 2. Interfacial Adhesion Failure : Impact on print-coating surface defects

   Författare :Hajer Kamal Alm; Lars Wågberg; Göran Ström; Janet Preston; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ink-paper coating adhesion; offset printing; calcium carbonate pigments; polyacrylate; dispersant; print mottle; surface chemistry; hygroscopy of surfaces; coating structure; print quality; water interference mottle; Fiber- och polymervetenskap; Fibre and Polymer Science;

   Sammanfattning : The aim of this work was to develop a solid knowledge on formulation effects controlling offset ink-paper coating adhesion and to identify key factors of the coating and printing process affecting it. Focus lay on comprehending the impact of pigment dispersant on ink-paper coating adhesion and ultimately on the print quality of offset prints. LÄS MER

4. 3. Laboratory method for the study of moisture-induced waviness in paper

   Författare :Cecilia Land; Göran Ström; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; method; moisture; paper; paper web; wavelength; waviness; Cellulose and paper engineering; Cellulosa- och pappersteknik; Chemical Engineering; Kemiteknik;

   Sammanfattning : Paper that is subjected to moisture undergoes dimensional changes. It expands during moistening and shrinks during drying. When the paper is under tension between rollers, the effects are complex since shrinkage and expansion are restricted in the width direction. Waves can then appear on the paper web. LÄS MER

5. 4. Printability and Ink-Coating Interactions in Inkjet Printing

   Författare :Erik Svanholm; Göran Ström; Gunnar Engström; Janet Preston; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; coating; inkjet; print quality; printability; pigment; silica; polyvinyl alcohol; colorant; ink absorption; Chemical engineering; Kemiteknik; Chemical Engineering; Kemiteknik;

   Sammanfattning : Inkjet is a digital printing process where the ink is ejected directly onto a substrate from a jet device driven by an electronic signal. Most inkjet inks have a low viscosity and a low surface tension, which put high demands on the coating layer’s porosity and absorbency characteristics. LÄS MER

7. 5. Absorption non-uniformity characterisation and its impact on flexographic ink distribution of coated packaging boards

   Författare :Sofia Thorman; Li Yang; Göran Ström; Magnus Lestelius; Janet Preston; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Liquid absorption; Absorption non-uniformity; Characterisation; Measurement technique; Print Mottle; Flexography; Coated packaging boards; Chemical Engineering; Kemiteknik;

   Sammanfattning : There are high demands on flexographic print quality to be sufficiently high and consistent in order to create a competitive packaging. At the same time the production efficiency need to be high. Printers thus need to achieve the same quality every time and quickly start-up new printing jobs. LÄS MER