Sökning: "Fractography"
Visar resultat 16 - 20 av 24 avhandlingar innehållade ordet Fractography.
16. Interaction and adhesion at the interface between wood and paint, glue, lacquer measured with DMTA and SEM
Sammanfattning : The aim of the present thesis was to study the interface between wood (Pinus sylvestis) and synthetic polymers such as glue, lacquer and paint. The weakest part of these interfaces is always the bond. The long-term properties of bonds between wood and an adherend are those which are interesting. LÄS MER
17. Damage tolerance and residual strength of composite sandwich structures
Sammanfattning : The exploitation of sandwich structures as a means toachieve high specific strength and stiffness is relatively new.Therefore, the knowledge of its damage tolerance is limitedcompared to other structural concepts such as truss bars andmonocoque plate solutions. Several aspects of the damage tolerance of sandwichstructures are investigated. LÄS MER
18. Microstructure and Mechanical Properties of High Chromium Steel Weld Metals
Sammanfattning : The microstructure of three types of Cr steel weld metals, containing 5%, 9% and 12% chromium, was studied in different heat treated conditions using optical microscopy, analytical transmission electron microscopy and atom probe field-ion microscopy. The mechanical properties of the weld metals were investigated. LÄS MER
19. Microstructure and Fatigue Analysis of PM-HIPed Alloys : A Focus on Inconel 625 and High-Nitrogen Tool Steel
Sammanfattning : Nickel-based superalloys and tool steels are well-known high-performance alloys due to their extensive use in many different industries. Nickel-based superalloys have found their way into aircraft, aerospace, marine, chemical, and petrochemical industries owing to their excellent high-temperature corrosion and oxidation resistance. LÄS MER
20. Precipitation in Advanced Stainless Steels
Sammanfattning : Advanced stainless steels often suffer from complex precipitation behaviour due to the high levels of alloying elements needed to obtain their attractive properties. This demands a correct handling of the material to avoid formation of harmful phases during production, manufacturing and service. LÄS MER