Sökning: "Fluid Model"

Visar resultat 16 - 20 av 1366 avhandlingar innehållade orden Fluid Model.

  1. 16. Computational fluid-dynamics investigations of vortex generators for flow-separation control

    Författare :Florian von Stillfried; Arne Johansson; Stefan Wallin; Jonathan Morrison; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; flow-separation control; vane vortex generator; vortex generator jet; zero-pressure-gradient turbulent boundary layer; adverse-pressure-gradient turbulent boundary layer; statistical modelling; turbulence; Reynolds stress- transport model; computational fluid dynamics;

    Sammanfattning : Many flow cases in fluid dynamics face undesirable flow separation due to ad-verse pressure gradients on wall boundaries. This occurs, for example, due togeometrical reasons as in a highly curved turbine-inlet duct or on flow-controlsurfaces such as wing trailing-edge flaps within a certain angle-of-attack range. LÄS MER

  3. 17. Fluid flow through and deformation of wood fiber networks

    Författare :Patrik Pettersson; Veronique Michaud; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strömningslära; Fluid Mechanics;

    Sammanfattning : Cellulose-based commercial items such as paper and laminated flooring are vital to the local economy of northern Sweden. These products are commonly manufactured in suspension where fluids such as water or air are drained through the fiber network in some value-added steps in the manufacturing process. LÄS MER

  4. 18. Noise radiation from drill steels : and other experimental investigations in acoustics and fluid mechanics

    Författare :Jan-Erik Ögren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strömningslära; Fluid Mechanics;

    Sammanfattning : Drill rod noise has become a major noise source in percussive drilling. Generation of flexural waves, which seem to be responsible for most of the noise, is studied in a model with dynamic photoelasticity and in the real drill rod with strain gauge technique. LÄS MER

  5. 19. Model based aircraft design : high angle of attack aerodynamics and weight estimation methods

    Författare :Christopher Jouannet; John Fielding; Linköpings universitet; []
    Nyckelord :TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : This thesis addresses modelling of high angle of attack aerodynamic characteristics and weight estimation for highly maneuverable aircraft during conceptual design. In order to allow configuration selection with sufficient confidence, especially with unconventional configurations, high angle of attack aerodynamic prediction and weight estimations methods need to be improved. LÄS MER

  7. 20. Numerical modelling of biomass thermochemical conversion and potassium release

    Författare :Seyed Morteza Mousavi; Strömningsteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Numerical modelling; particle model; bed model; CFD simulation; biomass; pyrolysis; ; combustion; gasification; potassium release; alkali;

    Sammanfattning : The use of biomass as a renewable source of energy has been increasing over the past few decades, and biomass is regarded as a promising replacement for fossil fuels. Thermochemical conversion of biomass is a common approach for biomass utilization with a relatively short conversion time. LÄS MER