Sökning: "Flank wear"

Visar resultat 11 - 15 av 25 avhandlingar innehållade orden Flank wear.

  1. 11. Microstructure of a cubic boron nitride tool material before and after hard turning

    Författare :Jenny Angseryd; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EELS; cBN; microstructure; PCBN; adherent layer; EDX; wear; SEM; EFTEM; TEM;

    Sammanfattning : AbstractPolycrystalline cubic boron nitride (PCBN) materials are widely used in turning of hardened steels due to their beneficial mechanical properties like high hardness at elevated temperatures and, compared to diamond, for being more chemically stable towards iron at temperatures typical for turning operations (800-1000˚C). The wear of PCBN tools is influenced by several factors, like machining parameters, different tool geometries and varying composition of PCBN tools as well as workpiece material. LÄS MER

  3. 12. On tribological design in gear tooth contacts

    Författare :Ellen Bergseth; Ulf Olofsson; Karsten Stahl; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; friction; gear contact; gear manufacturing; surface boundary layers; surface topography; wear;

    Sammanfattning : The correct tribological design will have a considerable effect on a gear’s service life and efficiency. The purpose of this thesis is to clarify the impact of variation in the gear tooth flank tribological system on the gear contact load capacity – to increase the understanding of how surface topography and lubricant interact. LÄS MER

  4. 13. Microstructure of a cubic boron nitride tool material and its degradation during hard turning operations

    Författare :Jenny Angseryd; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; adherent layer; cBN; PCBN; SEM; TEM; EELS and APT; wear; EFTEM;

    Sammanfattning : Abstract. Polycrystalline cubic boron nitride (PCBN) materials are widely used in turning operations of hardened steels due to their beneficial mechanical properties like maintained high hardness at elevated temperatures, adequate toughness and for being more chemically stable towards iron compared to diamond at temperatures typical for turning operations. LÄS MER

  5. 14. Efficiency and wear properties of spur gears made of powder metallurgy materials

    Författare :Li Xinmin; Ulf Olofsson; Giovanni Straffelini; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Powder Metallurgy Gears; Efficiency; Wear; Friction; Porosity Structure; FZG gear test rig; Machine Design; Maskinkonstruktion;

    Sammanfattning : Powder metallurgy (PM) is usually used in manufacturing parts with complex geometries, such as gears and structural parts. The main attractions of PM are the high rate of material utilization, environmental friendliness of production, economic advantages (especially for complex geometries), and possibility of obtaining lighter components. LÄS MER

  7. 15. Cam Roller Contact : The topographical aspect

    Författare :Frédéric Cabanettes; Bengt Göran Rosén; Peter Hansbo; Högskolan i Halmstad; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; injection cam; roller; surface topography; rough contact model; wear test; classification of surfaces; manufacturing evaluation; Mechanical manufacturing engineering; Mekanisk tillverkningsteknik;

    Sammanfattning : The automotive industry and the design of engines are strongly ruled by performance and legislation demands. First order aspects defining the main functions of a component are well known and new challenges appear at a lower scale. LÄS MER