Sökning: "FIB-SEM"

Visar resultat 1 - 5 av 17 avhandlingar innehållade ordet FIB-SEM.

  1. 1. Microscopy investigation of the high temperature corrosion of iron and two stainless steels

    Författare :Torbjörn Jonsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 353MA; EDX; X20; TEM; stainless steel; water vapour; iron; SEM; vaporisation; High-temperature oxidation; microstructure; FIB SEM.; sulphur dioxide; FIB;

    Sammanfattning : .... LÄS MER

  3. 2. Microscopy of high temperature oxidation of iron and some stainless steels

    Författare :Torbjörn Jonsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; water vapour; sulphur dioxide; FIB; X20; stainless steel; 353MA; EDX; KCl; FIB SEM; SEM; microstructure; TEM; iron; High-temperature oxidation; in-situ ESEM;

    Sammanfattning : This thesis concerns the high temperature oxidation of iron and some stainless steels. The oxide scales, as well as the subjacent metal, were investigated using a range of electron and ion microscopy techniques, including SEM, TEM, EDX and FIB. The aim was to link the microstructural observations to the oxidation mechanisms of the materials. LÄS MER

  4. 3. Quantitative Electron Microscopy Studies of Metal Nanoparticle Catalysts: Nanostructure, Support Interaction and Ageing Effects

    Författare :Torben Nilsson Pingel; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; CO oxidation; strain; ageing; specimen preparation; scanning electron microscopy SEM ; FIB SEM; supported nanoparticle catalyst; transmission electron microscopy TEM ; particle size distribution PSD ; platinum;

    Sammanfattning : Heterogeneous catalysis plays a major role in modern society, for example in chemical production, sustainable energy production and emission control technologies. Metal nanoparticles (NPs) supported on oxide materials are frequent catalytic systems in this field. LÄS MER

  5. 4. Quantitative studies of changes in microstructure and activity during ageing of supported catalysts

    Författare :Torben Pingel; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; supported nanoparticle catalyst; scanning electron microscopy SEM ; quantitative; bimetallic catalyst; ageing properties; CO oxidation; FIB SEM; specimen preparation; particle size distribution PSD ; transmission electron microscopy TEM ;

    Sammanfattning : Catalytic converters have substantially contributed to the improvement of air quality in populated areas in the last decades by abatement of the emission of hazardous componentssuch as CO, unburned hydrocarbons and NOx. However, due to the exposure to high temperature and different components in the exhaust gas, the performance of the catalysts degrades with time. LÄS MER

  7. 5. An Insight into the Critical Role of Microstructure and Surface Preparation on Localized Conversion Coating Deposition on Cast Al Alloys

    Författare :Salil Sainis; Caterina Zanella; Ehsan Ghassemali; Marjorie Olivier; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminium alloys; cast Al-Si alloys; conversion coating treatment; cerium; localized deposition; surface preparation; microstructure; SEM; FIB-SEM; AFM-SKPFM; Aluminiumlegeringar; gjutna Al-Si legeringar; Cerium; lokal deposition; omvandlingsbeläggningsbehandling; förbehandling av yta; mikrostruktur; SEM; FIB-SEM; AFM-SKPFM;

    Sammanfattning : The spontaneous cerium conversion coating formation over aluminium alloys is affected by the chemical process conditions, the surface preparation prior to conversion treatment and the microstructure of the underlying alloy. Most research performed until now focus only on the former whereas the influence of the latter two is poorly understood. LÄS MER