Sökning: "FE implementation"

Visar resultat 1 - 5 av 41 avhandlingar innehållade orden FE implementation.

  1. 1. Investigations on the Oxidation of Iron-chromium and Iron-vanadium Molten Alloys

    Författare :Haijuan Wang; Seshadri Seetharaman; Ashok Lahiri; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Oxidation; High-alloy steelmaking; Retention; CO2-O2; Fe-Cr melt; Fe-Cr-C melt; Fe-V melt; Vanadium containing slags; Kinetics; Thermodynamics properties.; Metallurgical process engineering; Metallurgisk processteknik; Materials science; Teknisk materialvetenskap;

    Sammanfattning : With the progress of high alloy steelmaking processes, it is essential to minimize the loss of valuable metals, like chromium and vanadium during the decarburization process, from both economic as well as environmental view points. One unique technique to realize this aim, used in the present work, is the decarburization of high alloy steel grades using oxygen with CO2 in order to reduce the partial pressure of oxygen. LÄS MER

  3. 2. FE-Simulation of Metal Cutting Processes

    Författare :Ahmet Semih Ertürk; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Metal cutting; Ductile fracture; Gradient damage; Finite element method; Turning; Machining; Inverse identification;

    Sammanfattning : This thesis deals with the finite element (FE) simulation of machining processes. Realistic simulation of metal cutting processes enables a more resource-efficient machinability assessment for a given material in terms of cutting forces, chip shape and tool wear at different ranges of cutting conditions. LÄS MER

  4. 3. Analysis and Implementation of Preconditioners for Prestressed Elasticity Problems : Advances and Enhancements

    Författare :Ali Dorostkar; Maya Neytcheva; Thomas Huckle; Uppsala universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; FEM; Saddle point matrix; Preconditioning; Schur complement; Generalized Locally Toeplitz; Prestressed elasticity; Scientific Computing; Beräkningsvetenskap;

    Sammanfattning : In this work, prestressed elasticity problem as a model of the so-called glacial isostatic adjustment (GIA) process is studied. The model problem is described by a set of partial differential equations (PDE) and discretized with a mixed finite element (FE) formulation. LÄS MER

  5. 4. Bridge Overhang Slabs with Edge Beams : LCCA and Structural Analysis for the Development of New Concepts

    Författare :José Javier Veganzones Muñoz; Costin Pacoste; Raid Karoumi; Lars Pettersson; Rui Vaz Rodrigues; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Overhang slab; Edge beam; Life-cycle Cost Analysis; Non-linear FE-analysis; Design methods; Shear force; Failure mode; Effective width; Minimal width.; Konsolplattor; Kantbalkar; Livscykelkostnadsanalys; Icke-linjär FE-analys; Dimensioneringsmetoder; Tvärkrafter; Brott; Fördelningsbredd; Minimal bredd.; Bro- och stålbyggnad; Structural Engineering and Bridges;

    Sammanfattning : Bridge edge beams are associated with high life-cycle costs because of the need of maintenance, which also causes traffic disturbances. For this reason, the Swedish Transport Administration started a project to find better solutions. One of the proposals was a design without edge beam. LÄS MER

  7. 5. On customization of orthopedic implants - from design and additive manufacturing to implementation

    Författare :Marie Cronskär; Mats Tinnsten; Mikael Bäckström; Lars-Erik Rännar; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Patient-specific implants; Additive manufacturing; Electron beam melting; Multibody musculoskeletal analysis; Orthopedic implants; Clavicle; Finite element analysis; Computer aided design; Osteosynthesis plate; Hip stem implants;

    Sammanfattning : This doctoral thesis is devoted to studying the possibilities of using additive manufacturing (AM) and design based on computed tomography (CT), for the production of patient-specific implants within orthopedic surgery, initially in a broad perspective and, in the second part of the thesis focusing on customized clavicle osteosynthesis plates. The main AM method used in the studies is the Electron Beam Melting (EBM) technology. LÄS MER