Sökning: "Engineering physics"

Visar resultat 6 - 10 av 1085 avhandlingar innehållade orden Engineering physics.

1. 6. Mid-infrared photonic devices for on-chip optical gas sensing

   Författare :Floria Ottonello Briano; Kristinn B. Gylfason; Delphine Marris-Morini; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; mid-infrared; mid-IR; photonics; silicon photonics; gas sensing; optical sensing; optical gas sensing; spectroscopy; absorption; dispersion; carbon dioxide; CO2; CO2 sensing; trace gas; ethanol sensing; alcohol sensing; waveguide; photonic waveguide; ring resonator; nanowire; nanoheater; emitter; thermal source; bolometer; microbolometer; thermal detector; high frequency; 3 omega method; plasmonic; platinum; Kanthal; silicon-on-insulator; micro-electro-mechanical systems MEMS ; microfabrication; microsystems; microtechnology; nanotechnology; Optik och fotonik; Optics and Photonics; Electrical Engineering; Elektro- och systemteknik;

   Sammanfattning : Gas detection is crucial in a wide range of fields and applications, such as safety and process control in the industry, atmospheric sciences, and breath diagnostics. Optical gas sensing offers some key advantages, compared to other sensing methods such as electrochemical and semiconductor sensing: high specificity, fast response, and minimal drift. LÄS MER

3. 7. Experimental investigations of ageing of commercial BEV Li-ion batteries

   Författare :Kristian Bartholdsson Frenander; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; silicon oxide; lithium plating; ageing; Physics-based modelling; Electric Vehicles; Lithium Ion Batteries; lifetime; NCA; State of Charge;

   Sammanfattning : The rapid development of lithium-ion batteries has enabled changes in widespread applications ranging from portable electronics to electric vehicles and large scale grid energy storage. However, battery ageing remain a challenge in all these applications, and this thesis seeks to contribute to the understanding of Li-ion battery degradation. LÄS MER

4. 8. VCSEL Equivalent Circuits and Silicon Photonics Integration

   Författare :Alexander Grabowski; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; vertical-cavity surface-emitting laser; light source integration; equivalent circuit; silicon photonics; sensing; optical interconnects;

   Sammanfattning : The vertical-cavity surface-emitting laser (VCSEL) is a light source of great importance for numerous industrial and consumer products. The main application areas are datacom and sensing. LÄS MER

5. 9. Numerical Simulations of Flows around Trains and Buses in Cross Winds

   Författare :Hassan Hemida; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; winds; Trains and buses aerodynamics; LES; DES;

   Sammanfattning : When cruising in strong winds, ground vehicles can experience strong aerodynamic forces and moments that may increase drag, reduce their stability, generate noise and induce accidents in the case of strong side winds. However, prevention of the unwanted influences of side winds requires that the flow structures around vehicles are fully understood in both the instantaneous and time-averaged flow. LÄS MER

7. 10. Dynamic Modeling and Simulation of SAG Mill Circuits with Pebble Crushing

   Författare :Haijie Li; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dynamic modeling; AG SAG mill; Fundamental modeling method; Data-driven modeling method; Pebble crushing; Cone crusher; Comminution process;

   Sammanfattning : Grinding is one of the most energy-consuming processes in the mining industry. As a critical part of the comminution process, autogenous grinding (AG) or semi-autogenous grinding (SAG) mills are often used for primary grinding. LÄS MER