Sökning: "Engineering and Technology Chemical Engineering Corrosion Engineering"
Visar resultat 1 - 5 av 180 avhandlingar innehållade orden Engineering and Technology Chemical Engineering Corrosion Engineering.
1. Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties
Sammanfattning : Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications. LÄS MER
2. Corrosion of Ferritic Stainless Steels Used in Solid Oxide Fuel Cells
Sammanfattning : Solid oxide fuel cells (SOFC) are energy conversion systems with clean emissions (depending on the fuel used) and high electrical efficiencies, which could potentially replace conventional conversion systems such as combustion engines. However, other issues, such as high costs and limited lifetime, must be resolved before widespread commercialization of SOFCs can be achieved. LÄS MER
3. Co-firing complex biomass in a CFB boiler : ash transformation, corrosion control and materials selection
Sammanfattning : The effects of greenhouse gas net emissions on global warming, stricter legislation on waste handling, and the pursuit of ever cheaper heat- and power production are all important factors driving the introduction of complex fuels in incineration plants. However - without fundamental knowledge regarding ash transformation, corrosion control, and materials selection – this introduction of potentially economically and environmentally beneficial fuels, might instead cause economic loss and environmentally adverse effects. LÄS MER
4. Chemistry and Process Design of Integrated Removal of Nitrogen and Sulfur oxides in Pressurized Flue Gas Systems
Sammanfattning : Carbon capture and storage is vital to reach the climate goals to limit the increase in the global temperature. Among the carbon capture technologies, oxy-fuel and chemical looping combustion produce a stream mainly containing carbon dioxide (CO2) and water but also contaminants such as nitrogen oxides (NOx) and sulfur oxides (SOx). LÄS MER
5. Magnetron Sputtering of Nanocomposite Carbide Coatings for Electrical Contacts
Sammanfattning : Today’s electronic society relies on the functionality of electrical contacts. To achieve good contact properties, surface coatings are normally applied. Such coatings should ideally fulfill a combination of different properties, like high electrical conductivity, high corrosion resistance, high wear resistance and low cost. LÄS MER