Sökning: "Electron Beam Melting EBM"
Visar resultat 6 - 10 av 27 avhandlingar innehållade orden Electron Beam Melting EBM.
6. Electron beam melting: Impact of part surface properties on metal fatigue and bone ingrowth
Sammanfattning : AbstractThe aim of this thesis is to investigate aspects on how additive manufacturing (AM) contributes to functional bone implants with the use of the electron beam melting (EBM) technology. AM manufactures parts according to computer-aided design, and the EBM technology melts powder using an electron beam, which acts similar to a laser beam. LÄS MER
7. A study on Electron Beam Melted Ti-6Al-4V
Sammanfattning : The work presented in this dissertation is concerned with the microstructures and surface roughness of test slabs of Ti-6Al-4V produced by one of powder based Additive Manufacturing (AM) technique namely electron beam melting (EBM). The effects of process parameters of a EBM system and geometry factors of a EBM build such as slabs’ thickness and height etc. LÄS MER
8. Optimization of Electron Beam Melting for Production of Small Components in Biocompatible Titanium Grades
Sammanfattning : Additive manufacturing (AM), also called 3D-printing, are technologies where parts are formed from the bottom up by adding material layer-by-layer on top of each other. Electron Beam Melting (EBM) is an AM technique capable of manufacturing fully solid metallic parts, using a high-intensity electron beam to melt powder particles in layers to form finished components. LÄS MER
9. ELECTRON BEAM MELTING OF ALLOY 718 - POWDER RECYCLING AND ITS EFFECT ON DEFECT FORMATION
Sammanfattning : As for any production process, the performance of additively manufactured components is ultimately dependent on the quality of the feedstock material. Consequently, for critical components, the feedstock needs to be carefully controlled to assure a stable and reliable quality. LÄS MER
10. Additive manufacturing of Ni-based Superalloys- an analysis of parameter and strategy driven properties in Electron Beam Melting Process
Sammanfattning : Metal AM processes produce significantly rough surfaces as compared to wrought or machined components. Currently, the as-EBM surfaces are extremely rough and consequently, the as-built components could not be directly used as commercial products. The state-of-the-art research has focused primarily on deeply machined (DM) samples. LÄS MER