Sökning: "Duplex steel"

Visar resultat 11 - 15 av 56 avhandlingar innehållade orden Duplex steel.

  1. 11. Multiscale material modeling of duplex stainless steel

    Författare :Robert Lillbacka; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : .... LÄS MER

  3. 12. The Influence of Composition and Hot Processes on Heat Affected Zone and Weld Metal Behavior and Mechnacal Properties of Ti Grade 5 and Stainless Steel

    Författare :Esa Kivineva; KTH; []
    Nyckelord :Stainless steel; Duplex stainless steel; Titanium Grade 5; Ti-6Al-4V; Microstructure; Mecjhanical properties; Welding; Welding simulation;

    Sammanfattning : This thesis discusses on results of experiments carried outwith austenitic, duplex and super duplex stainless steels andTi-6Al-4V. In these it has been seen that the heat cycle duringwelding or weld simulation has a great effect on the propertiesof thematerials. LÄS MER

  4. 13. Thin-Film Coated Steel Foils as Interconnects for Solid Oxide Fuel Cells (SOFC)

    Författare :Rakshith Nugehalli Sachitanand; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Interconnect; Fuel Cell; Energy; SOFC; Steel; Corrosion;

    Sammanfattning : Solid Oxide Fuel Cells (SOFCs) are electrochemical energy conversion devices that have the potential to achieve high efficiencies while using a broad range of fuels. The advancement of the technology has however been hindered by a number of technical and economic barriers, one of which is the durability and cost of the bipolar plate or interconnect that connects individual cells in series to form a so-called ‘stack’. LÄS MER

  5. 14. Fracture toughness properties of duplex stainless steels

    Författare :Henrik Sieurin; Rolf Sandström; Jan-Olof Nilsson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; duplex stainless steel; fracture toughness; austenite reformation; sigma phase; material optimisation; Materials science; Teknisk materialvetenskap;

    Sammanfattning : Good toughness properties in base and weld material enable the use of duplex stainless steels (DSS) in critical applications. DSS offer high strength compared to common austenitic stainless steels. LÄS MER

  7. 15. Super duplex stainless steels : Microstructure and propertiesof physically simulated base and weld metal

    Författare :Vahid Hosseini; Leif Karlsson; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Super duplex stainless steel; weld metal; physical simulation; phase balance; precipitation; secondary phases; corrosion; nitrogen loss; arc heat treatment; production technology; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : High-temperature processing and application of super duplex stainless steel(SDSS) are associated with the risk of changes in the ferrite/austenite balance and precipitation of secondary phases. This study was therefore aimed at improving knowledge about effects of thermal cycles on the microstructure and properties of SDSS base and weld metal. LÄS MER