Sökning: "Ductile deformation"
Visar resultat 1 - 5 av 83 avhandlingar innehållade orden Ductile deformation.
1. Microstructure and deformation behaviour of ductile iron under tensile loading
Sammanfattning : The current thesis focuses on the deformation behaviour and strain distribution in the microstructure of ductile iron during tensile loading. Utilizing Digital Image Correlation (DIC) and in-situ tensile test under optical microscope, a method was developed to measure high resolution strain in microstructural constitutes. LÄS MER
2. On the deformation behavior and cracking of ductile iron; effect of microstructure
Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER
3. P-T evolotion and High-temperature deformation of Precambrian eclogite, Sveconorwegian orogen
Sammanfattning : The 1.1-0.9 Ga Sveconorwegian orogen is one of several Grenvillian-aged orogenic belts that mark the amalgamation of supercontinent Rodinia. The highest-pressure rocks in the Sveconorwegian orogen are eclogites in the Eastern Segment (SW Sweden). LÄS MER
4. Simulation of dynamic instabilities during high rate deformation of ductile bars and plates
Sammanfattning : In this thesis, some of the phenomena occurring in plates and cylindrical bars subjected to dynamic loading are investigated. Numerical simulations using a dynamic finite element code are performed for a number of different sized specimens with various initial surface imperfections. Typically imposed loading velocities are in the range 10m/s.. LÄS MER
5. Computational modelling of machining - Mesh objective ductile damage modelling
Sammanfattning : AbstractTo strengthen the competitiveness the manufacturing industry strives for a continuousdevelopment of cost efficient manufacturing processes and improved product quality.These research and development issues are addressed by increasing the implementationof simulation tools based on finite element method (FEM). LÄS MER