Sökning: "Deformation"
Visar resultat 16 - 20 av 1109 avhandlingar innehållade ordet Deformation.
16. P-T evolotion and High-temperature deformation of Precambrian eclogite, Sveconorwegian orogen
Sammanfattning : The 1.1-0.9 Ga Sveconorwegian orogen is one of several Grenvillian-aged orogenic belts that mark the amalgamation of supercontinent Rodinia. The highest-pressure rocks in the Sveconorwegian orogen are eclogites in the Eastern Segment (SW Sweden). LÄS MER
17. Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons
Sammanfattning : The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. LÄS MER
18. Three-Dimensional Load-Deformation Relationships of Arbitrarily Loaded Coiled Springs
Sammanfattning : This paper reports the development of a computer based tool that can be used to predict the three-dimensional load-deformation relationships of arbitrarily loaded coiled springs. The non-linear deformation of the spring is calculated by dividing the spring into small elements for which the load-deformation relationships can be considered to be linear. LÄS MER
19. Analyses of Resilient Behavior of Unbound Materials for the Purpose of Predicting Permanent Deformation Behavior
Sammanfattning : Post compaction is the unintended compaction of the unbound material that commences immediately after a road is brought into service and caused by densification of the material. Analogies to this post compaction can also be seen in laboratory and field tests. LÄS MER
20. On the deformation behavior and cracking of ductile iron; effect of microstructure
Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER