Sökning: "Combustion model"

Visar resultat 1 - 5 av 454 avhandlingar innehållade orden Combustion model.

  1. 1. Pulsating Combustion - Combustion Characteristics and Reduction of Emissions

    Författare :Annika Lindholm; Förbränningsfysik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Exhaust gas recirculation; NOx; Heat Release; Combustion related radicals; Laser based measurements; Pulsating Combustion; Unsteday Flow; Emissions; Combustion; Energy research; Energiforskning;

    Sammanfattning : In the search for high efficiency combustion systems pulsating combustion has been identified as one of the technologies that potentially can meet the objectives of clean combustion and good fuel economy.Pulsating combustion offers low emissions of pollutants, high heat transfer and efficient combustion. LÄS MER

  3. 2. Model-Based Optimization of Combustion-Engine Control

    Författare :Gabriel Turesson; Institutionen för reglerteknik; []
    Nyckelord :Model Predictive Control MPC ; Partially Premixed Combustion; Pressure Sensor Feedback; Model Based Control; Particle Filter; Multiple Fuel Injections; Gasoline Compression Ignition; Model Predictive Control MPC ; Partially Premixed Combustion PPC ; Low Temperature Combustion; Model Based Control; Multiple Fuel Injections; Pressure Sensor Feedback; Particle Filter; Gasoline Compression Ignition;

    Sammanfattning : The work presented in this thesis is motivated by the need to reliably operate a compression-ignition engine in a partially premixed combustion (PPC) mode. Partially premixed combustion is a low temperature combustion concept, where the ignition delay is prolonged to enhance fuel-air mixing in the combustion chamber before the start of combustion. LÄS MER

  4. 3. Modeling Auto-Ignition, Flame Propagation and Combustion in Non-Stationary Turbulent Sprays

    Författare :Anders Karlsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; auto-ignition; transient; flame propagation; turbulence; spray formation; prediction; stirred reactor approximation; model; reduced chemistry; combustion;

    Sammanfattning : This thesis focuses on detailed numerical studies of spray formation, auto-ignition, envelope flame development and combustion in a simple two-dimensional axi-symmetric geometry. A Lagrangian -- Eulerian formulation is used to analyze the droplet motion and gas flow field. LÄS MER

  5. 4. Computer Modeling of HCCI Combustion

    Författare :Roy Ogink; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; detailed-chemistry; surrogate fuel; homogeneous charge compression ignition; internal combustion engines; modeling; HCCI; gasoline; auto-ignition; combustion;

    Sammanfattning : During the last decade an alternative to conventional internal combustion engines, i.e. spark-ignited and Diesel engines, has been under investigation by an ever-increasing number of research groups. LÄS MER

  7. 5. Design and Optimization of In-Cycle Closed-Loop Combustion Control with Multiple Injections

    Författare :Carlos Jorques Moreno; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Diesel Combustion; Pilot-Main Injection; Pilot Mass Estimation; Cylinder Volume Estimation; Bayesian Estimation; In-Cycle Combustion Controllability; In-Cycle Combustion Control; Model Predictive Combustion Control; Stochastic Combustion Optimization; Hardware Quantification;

    Sammanfattning : With the increasing demand of transportation, biofuels play a fundamental role in the transition to sustainable powertrains. For the increased uncertainty of biofuel combustion properties, advanced combustion control systems have the potential to operate the engine with high flexibility while maintaining a high efficiency and robustness. LÄS MER