Sökning: "Cold work tool steel"
Visar resultat 11 - 15 av 19 avhandlingar innehållade orden Cold work tool steel.
11. Investigation of Topography, Adhesion and Diffusion Wear in Sliding Contacts during Steel and Titanium Alloy Machining
Sammanfattning : The aim of the present thesis work is to increase the fundamental knowledge of the tribological contact between the cutting tool and the work material in three different cutting operations, i.e. hard milling of cold work tool steels, turning in 316L stainless steel and turning in Ti6Al4V alloy, respectively. LÄS MER
12. High temperature galling : influencing parameters and mechanisms
Sammanfattning : Damage of forming tools at elevated temperatures is a major problem in metal forming processes such as hot stamping. Of special importance is the occurrence of adhesion and gross material transfer from the work-piece to the tool surface, a phenomenon known as galling. LÄS MER
13. Inhomogenity in microstructures
Sammanfattning : The purpose of the present thesis is to quantitativelycharacterise structural features which contribute to thematerial anisotropy and to relate developed parameters to thematerial properties. Various forms of structural inhomogeneitywere quantified with the help of comuterised image analysisusing quantitative metallography and statistical analysismethods. LÄS MER
14. Experimental and computational investigation of the roll forming process
Sammanfattning : One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. LÄS MER
15. Experimental and computational investigation of the roll forming process
Sammanfattning : One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. LÄS MER