Sökning: "Chemical process and manufacturing engineering"

Visar resultat 21 - 25 av 132 avhandlingar innehållade orden Chemical process and manufacturing engineering.

1. 21. ALTERNATIVE POLYETHYLENE CROSSLINKING CONCEPTS FOR POWER CABLE INSULATION

   Författare :Massimiliano Mauri; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; epoxy; crosslinking; HVDC; polymer blends; click-chemistry; polyethylene; Renewable Energy; High-voltage insulation;

   Sammanfattning : We currently witness an accelerating shift from fossil energy sources to renewables driven by the urgent need to reduce carbon emissions. Wind, solar and hydro power is most abundant in places far away from the end user, which necessitates the efficient transport of electricity over long distances. LÄS MER

3. 22. Alloys in Contact with Molten Salts for Thermal Storage Applications

   Författare :Esraa Hamdy Mohamedin; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Phase transition; Molten salts; High-temperature corrosion; Alumina-forming alloys; Carburisation; Thermal energy storage TES ; Laves phase; Concentrated solar power CSP ;

   Sammanfattning : The combination of a concentrated solar power (CSP) plant and a thermal energy storage (TES) system is a promising technology for power generation, in that it overcomes the challenges commonly faced by renewable energy systems, such as intermittency, dispatchability, and the gap between the energy supply and energy demand. The third generation (Gen3) CSP plants are designed to increase plant efficiency by using supercritical carbon dioxide (sCO2) instead of steam for the Brayton cycle gas turbines, requiring a minimum operating temperature of 750°C for the TES materials. LÄS MER

4. 23. Structure and mechanical properties of dual phase steels : An experimental and theoretical analysis

   Författare :Ylva Granbom; John Ågren; Ir Bruno C. De Cooman; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dual phase steels; continuous annealing; dilatometry; microstructure; mechanical properties; process parameters; dislocation model; plastic deformation; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik; Mikrostrukturutveckling i avancerade höghållfasta stål;

   Sammanfattning : The key to the understanding of the mechanical behavior of dual phase (DP) steels is to a large extent to be found in the microstructure. The microstructure is in its turn a result of the chemical composition and the process parameters during its production. LÄS MER

5. 24. Nitride Thin Films for Thermoelectric Applications : Synthesis, Characterization and Theoretical Predictions

   Författare :Mohammad Amin Gharavi; Per Eklund; Rickard Armiento; Björn Alling; Camille Pallier; Caterina Zanella; Linköpings universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : Thermoelectrics is the reversible process which transforms a temperature gradient across a material into an external voltage through a phenomenon known as the Seebeck effect. This has resulted in niche applications such as solid-state cooling for electronic and optoelectronic devices which exclude the need for a coolant or any moving parts and long-lasting, maintenance-free radioisotope thermoelectric generators used for deep-space exploration. LÄS MER

7. 25. Improvement of the tissue manufacturing process

   Författare :Jonna Boudreau; Bengt Järrehult; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Chemical Engineering; Kemiteknik;

   Sammanfattning : The creping process and the conditions on the Yankee cylinder are the key factors in the production process. They need to be kept under good control in order to maintain a high and uniform quality. LÄS MER