Sökning: "Chemical Engineering Corrosion Engineering"
Visar resultat 1 - 5 av 182 avhandlingar innehållade orden Chemical Engineering Corrosion Engineering.
1. Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties
Sammanfattning : Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications. LÄS MER
2. Corrosion of Ferritic Stainless Steels Used in Solid Oxide Fuel Cells
Sammanfattning : Solid oxide fuel cells (SOFC) are energy conversion systems with clean emissions (depending on the fuel used) and high electrical efficiencies, which could potentially replace conventional conversion systems such as combustion engines. However, other issues, such as high costs and limited lifetime, must be resolved before widespread commercialization of SOFCs can be achieved. LÄS MER
3. Chemistry and Process Design of Integrated Removal of Nitrogen and Sulfur oxides in Pressurized Flue Gas Systems
Sammanfattning : Carbon capture and storage is vital to reach the climate goals to limit the increase in the global temperature. Among the carbon capture technologies, oxy-fuel and chemical looping combustion produce a stream mainly containing carbon dioxide (CO2) and water but also contaminants such as nitrogen oxides (NOx) and sulfur oxides (SOx). LÄS MER
4. Co-firing complex biomass in a CFB boiler : ash transformation, corrosion control and materials selection
Sammanfattning : The effects of greenhouse gas net emissions on global warming, stricter legislation on waste handling, and the pursuit of ever cheaper heat- and power production are all important factors driving the introduction of complex fuels in incineration plants. However - without fundamental knowledge regarding ash transformation, corrosion control, and materials selection – this introduction of potentially economically and environmentally beneficial fuels, might instead cause economic loss and environmentally adverse effects. LÄS MER
5. Corrosion of steel bars in fibre reinforced concrete: corrosion mechanisms and structural performance
Sammanfattning : The viability of employing fibre reinforcement to improve the durability performance of RC structures by delaying and/or reducing rebar corrosion and by mitigating the structural impact of corrosion-induced damage have been investigated. Given the enhanced crack control of FRC, it could be advantageous to use fibres in civil engineering structures to decrease the ingress of corrosion-initiation substances. LÄS MER
