Sökning: "Carbide volume fraction"

Visar resultat 1 - 5 av 12 avhandlingar innehållade orden Carbide volume fraction.

1. 1. Cemented Carbide Sintering : Constitutive Relations and Microstructural Evolution

   Författare :Anders Petersson; KTH; []
   Nyckelord :Cemented carbides; Sintering; Constitutive relations; Microstructure; Densification; Modelling;

   Sammanfattning : Cemented carbides based on tungsten carbide and cobalt arecommonly produced by a powder metallurgy route including liquidphase sintering. The pressed compact densifies to almost halfits volume during sintering due to pore elimination. LÄS MER

3. 2. Modeling the Microstructure Evolution During and After Hot Working in Martensitic Steel

   Författare :Nima Safara Nosar; John Ågren; Göran Engberg; Hans-Olof Andrén; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Modeling; Martensitic steel; Carbides; Carbide size distribution; Carbide volume fraction; Carbide shape factor; Modellering; Martensitiskt stål; karbider; karbidstorleksfördelning; karbidvolymfraktion; karbidformfaktor; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : In this study, the goal is to predict the microstructure evolution during and after the hot working of a martensitic stainless steel with 13% chromium using a physically-based model in the form of a MATLAB toolbox. This model is based on dislocation density theory and consists of coupled sets of evolution equations for dislocation, vacancies, recovery, recrystallization, and grain growth. LÄS MER

4. 3. Microstructure of Cermets

   Författare :Per Lindahl; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; thermodynamic; microchemistry; N ; AP-FIM; Ti C; cutting tools; SEM; cemented carbide; TEM; sintering;

   Sammanfattning : The microstructure of several TiC-TiN-Mo2C-WC-Co/Ni model alloys and a commercial (Ti,Ta,W,Mo)(C,N)-(Co,Ni) type cermet was studied using x-ray diffraction, optical microscopy, scanning electron microscopy, analytical electron microscopy and atom probe field ion microscopy. In addition thermodynamical calculations were made in order to understand the development of the microstructure during sintering. LÄS MER

5. 4. Microstructural Evolution In As-cast Alloys during Plastic Deformation

   Författare :Mitra Basirat; Pär Jönsson; Hasse Fredriksson; Jacques Lacaze; KTH; []
   Nyckelord :plastic deformation; compression test; recrystallization; deformation band; As-cast; microsegregation; carbide dissolution; disordered structure; order disorder transformation; twining; steel; β brass; copper; SRA - E-Science SeRC ; SRA - E-vetenskap SeRC ;

   Sammanfattning : The effect of deformation on microstructural changes in metals and alloys is the subject of considerable practical interest. The ultimate goal is to control, improve and optimize the microstructure and texture of the finished products produced by metal forming operations. LÄS MER

7. 5. Water-based Tape Casting of Ceramics and Fabrication of Ceramic Laminates

   Författare :Annika Kristoffersson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; water-based tape casting; latex binders; high solids loading; silicon carbide; colloidal stability; polyelectrolyte dispersants; alumina; ceramic laminates; rheology;

   Sammanfattning : The objective of the work presented in this dissertation has been twofold: to develop a water-based system for tape casting and to build laminar structures from the tapes. A set of requirements on the binder was specified and latexes were identified as suitable for water-based tape casting, mainly owing to their low viscosity and high polymeric content. LÄS MER