Sökning: "Ca-treated steel"
Hittade 5 avhandlingar innehållade orden Ca-treated steel.
1. Evaluations of Non-metallic Inclusionsin Ca-treated Steels and Their Effect on the Machinability
Sammanfattning : In recent decades, a considerable development of steel with respect to the performance of steel has taken place, which also has resulted in large challenges to process these steel grades. Therefore, it is essential to make suitable modifications of non-metallic inclusions (NMI) in the steelmaking process and to have a good control of its characteristics to meet the target mechanical properties and to obtain a good machinability. LÄS MER
2. Microstructure and Wear of CVD Coatings used in Metal Cutting Applications
Sammanfattning : This thesis is concerned with the microstructural characterisation of wear resistant Al2O3 and Ti(C,N)coatings produced by chemical vapour deposition on cemented carbide cutting tools. The investigation focuses on the effect of deposition conditions on the microstructure and the microstructural evolution of the coatings during heat-treatments and metal cutting. LÄS MER
3. Steel characteristics and their link to chip breaking and tool wear in metal cutting
Sammanfattning : The vision of this thesis is to study how it is possible to obtain optimised workpieces during metal cutting processes in industry. Specifically, the work is aimed to increase the understanding between the steel characteristics and their link to the chip breaking and tool wear during metal cutting. LÄS MER
4. Inclusion Characteristics and Their Link to Tool wear in Metal Cutting of Clean Steels Suitable for Automotive Applications
Sammanfattning : This thesis covers some aspects of hard part turning of carburised steels using a poly‑crystalline cubic boron nitride (PCBN) cutting tool during fine machining. The emphasis is on the influence of the steel cleanliness and the characteristics of non‑metallic inclusions in the workpiece on the active wear mechanisms of the cutting tool. LÄS MER
5. Non-metallic inclusions in pipeline steels and their effect on the corrosion resistance
Sammanfattning : This thesis focus on investigations of the influence of non-metallic inclusions on corrosion in steel samples taken at different stages of the steel production when producing pipeline steels. The electrolytic extraction technique was used to extract inclusions from these steel samples and thereafter studying them using scanning electron microscopy in combination with energy dispersive microscopy. LÄS MER