Sökning: "CVD and PVD coatings"
Visar resultat 1 - 5 av 8 avhandlingar innehållade orden CVD and PVD coatings.
1. Microstructural, Mechanical and Tribological Characterisation of CVD and PVD Coatings for Metal Cutting Applications
Sammanfattning : The present thesis focuses on characterisation of microstructure and the resulting mechanical and tribological properties of CVD and PVD coatings used in metal cutting applications. These thin and hard coatings are designed to improve the tribological performance of cutting tools which in metal cutting operations may result in improved cutting performance, lower energy consumption, lower production costs and lower impact on the environment. LÄS MER
2. Microstructural investigation of CVD and PVD alumina coatings
Sammanfattning : .... LÄS MER
3. Cutting Edge Titanium-based CVD Hard Coatings
Sammanfattning : Modern tools for metal cutting applications, such as turning or milling, are typically improved with a thin protective coating. Despite being only a few microns thick, the coating can increase the lifetime of the tool by more than 100 times compared to an uncoated tool. Two different types of techniques are normally used to deposit the coatings, i. LÄS MER
4. Plasma Enhanced Chemical- and Physical- Vapor Depositions Using Hollow Cathodes
Sammanfattning : Development of coating deposition technologies, in terms of performance and costs, is an ongoing process. A promising class of deposition technologies are based on hollow cathode discharges. LÄS MER
5. Investigation of Topography, Adhesion and Diffusion Wear in Sliding Contacts during Steel and Titanium Alloy Machining
Sammanfattning : The aim of the present thesis work is to increase the fundamental knowledge of the tribological contact between the cutting tool and the work material in three different cutting operations, i.e. hard milling of cold work tool steels, turning in 316L stainless steel and turning in Ti6Al4V alloy, respectively. LÄS MER