Sökning: "CTMP"
Visar resultat 16 - 20 av 26 avhandlingar innehållade ordet CTMP.
16. High strength paper from high yield pulps by means of hot-pressing
Sammanfattning : AbstractHigh Yield Pulp (HYP), i.e. TMP, SGW or CTMP, is normally used in printing papers (News, SC and LWC) or in a middle layer on cardboard i.e. LÄS MER
17. Mechanical Pulp-Based Nanocellulose : Processing and applications relating to paper and paperboard, composite films, and foams
Sammanfattning : This thesis deals with processing of nanocellulose originating from pulps, with focus on mechanical pulp fibres and fines fractions. The nanocellulose materials produced within this research project were tested for different purposes ranging from strength additives in paper and paperboard products, via composite films to foam materials. LÄS MER
18. Modelling of Mass and Heat Transport in Paper - Evaluation of Mechanisms and Shrinkage
Sammanfattning : In this work a one-dimensional model for the mass and heat transport in the thickness direction of paper has been developed. Solid-based coordinates were applied to simplify incorporation of shrinkage. Liquid diffusion, gas convection and vapour and air diffusion were incorporated as mass transport mechansims. LÄS MER
19. Eco-friendly and Catalytic Surface Engineering of Cellulose and Nanocellulose
Sammanfattning : The non-stop use of petroleum-based materials such as plastics can generate significant environmental problems, including pollution of the oceans and increased CO2 levels, and cause diseases like cancer due to the starting monomers. Consequently, increased use of sustainable and non-toxic polymers and monomers is required to address these issues. LÄS MER
20. Aspects of optimizing pulp fibre properties for tissue and packaging materials
Sammanfattning : To improve the competitive advantages of pulp fibre-based materials for tissue and packaging over fossil-based products, it is essential to increase knowledge of the selectivity of the cooking and the chemimechanical processes by optimizing the unit operations of impregnation, cooking and refining. A general goal in pulping processes is to achieve as efficient and even fibre separation as possible. LÄS MER