Sökning: "CFD simuleringar"

Visar resultat 1 - 5 av 22 avhandlingar innehållade orden CFD simuleringar.

  1. 1. Lagrangian CFD Modeling of Impinging Diesel Sprays for DI HCCI

    Författare :Per Strålin; Hans-Erik Ångström; Christian Kreuger; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; HCCI; Diesel; early direct-injection; impinging nozzle; CFD; Lagrangian modeling; collision models; O’Rourke; Engineering mechanics; Teknisk mekanik;

    Sammanfattning : The homogeneous charge compression ignition (HCCI) concept has been acknowledged as a potential combustion concept for engines, due to low NOx and soot emissions and high efficiency, especially at part-load. Early direct-injection (DI) during the compression stroke is an option when Diesel fuel is used in HCCI. LÄS MER

  3. 2. IronArc a New Process for Pig Iron Production : A Numerical and Experimental Investigation Focusing on Mixing

    Författare :Kristofer Bölke; Mikael Ersson; Pär Jönsson; Stein Tore Johanssen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mixing time; Penetration depth; CFD simulations; IronArc; Water modeling; Mixing time Experiments; Omrörningstid; Penetrationsdjup; CFD simuleringar; IronArc; Vattenmodellering; Omrörningsexperiment; Metallurgical process science; Metallurgisk processvetenskap;

    Sammanfattning : I den här studien så var syftet att undersöka omrörningen och relaterade fenomen i den nyutvecklade IronArc processen. Processen använder sig av gasinjektion genom plasmageneratorer för att smälta och reducera en slagg bestående av järnoxid. LÄS MER

  4. 3. ANALYZING THE HYDRO DYNAMICS AND THE CHEMICAL REACTIONS IN PULP DIGESTER SYSTEMS USING CFD MODELLING

    Författare :Bijan Pourian; Erik Dahlquist; Laszlo Fuchs; Mälardalens högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CFD; MODELLING; SIMULATION; PULP; DIGESTER. CHEMICAL; MULTIPHASE; Cellulose and paper engineering; Cellulosa- och pappersteknik; Energy- and Environmental Engineering; energi- och miljöteknik;

    Sammanfattning : The aim of this thesis is to use differential analysis and finite volume method (FVM) to model and analyze a continuous pulp digester in order to create a detailed picture of the flow behaviour and chemical reactions in the digester. This information will be used to optimize wood chip flow and reactions and to diagnose and avoid faults such as hang-ups and channelling. LÄS MER

  5. 4. Jet Impingement and Infrared Heating of Cylindrical Foods. Flow and Heat Transfer Studies

    Författare :Eva Olsson; Livsmedelsteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Termisk teknik; fluiddynamik; plasma; Thermal engineering; applied thermodynamics; Gaser; fluid dynamics; plasmas; Gases; RSM; CFD; inverse heat transfer; jet impingement heat transfer; infrared heating; termodynamik; Food and drink technology; Livsmedelsteknik; PIV; SST; food; cylinder;

    Sammanfattning : Rapid heat transfer methods such as jet impingement and infrared radiation can be used to speed up thermal processing in the food industry. The heating rate affects important food characteristics, such as colour. LÄS MER

  7. 5. Multiphysics modelling of PEM fuel cells - with reacting transport phenomena at micro and macroscales

    Författare :Munir Khan; Värmeöverföring; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; macroscale; PEM fuel cells; CFD; microscale; multiphysics; multiphase; anisotropy;

    Sammanfattning : This thesis presents numerical simulations of reacting transport phenomena in polymer electrolyte membrane (PEM) fuel cells. Broadly, the presented work is subdivided into macro and microscale simulations. LÄS MER